HandBrake for Windows support
An Activity Log
for support requests. Please read How-to get an activity log?
for details on how and why this should be provided.
- Posts: 9
- Joined: Tue Sep 04, 2018 6:31 am
Description of problem or question:
if 18 to 20 are better in crf why you said to put that for standard definition instead of 20 to 23 for standard?? because of grain and lower quality ?
18 to 20 suposed to be better quality so why not using it for hd and not standard! https://i.imgur.com/xX2MQzF.gifv
like showing here thx for reply!
Steps to reproduce the problem (If Applicable):
HandBrake version (e.g., 1.0.0):
Operating system and version (e.g., Ubuntu 16.04 LTS, macOS 10.13 High Sierra, Windows 10 Creators Update):
HandBrake Activity Log ***required***
(see How-to get an activity log
Code: Select all
Please replace this text with the contents of your log file between the two code tags - OR - provide a pastebin URL in place of these 3 lines.
- HandBrake Team
- Posts: 5165
- Joined: Sat Feb 09, 2008 7:21 pm
For SD content, you are starting out with a low quality source. If you want to refrain from degrading much further, you use a lower RF.
For HD content, you could apply the same logic as above. I.e. "you want to refrain from degrading it much further". But this is overkill for the vast majority of people. The original quality of HD sources is often more than adequate for most peoples viewing environments and it is OK to allow a bit more loss during the encoding process in order to achieve smaller file sizes.
- Posts: 1321
- Joined: Thu Aug 09, 2007 12:16 pm
Additionally, SD sources are typically viewed on HD or higher displays, magnifying imperfections. So it's necessary to use a lower RF to avoid introducing artifacts that will be more noticeable in this case.
Rate Factor is not an absolute quality metric. It's more like quality-per-pixel. So the output resolution is an important factor in what RF range is acceptable.