Cpu overheating in core i7 7th gen

HandBrake for Windows support
Forum rules
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
Locked
Tech_geek83
Posts: 5
Joined: Tue May 15, 2018 12:04 pm

Cpu overheating in core i7 7th gen

Post by Tech_geek83 » Tue May 15, 2018 12:08 pm

When i have been trans coding a movie i have noticed that my cup has been over heating and shutting down due to the heat. Is there anything in the settings of Handbrake that can be changed to lessen the number of cores so this does not happen.

User avatar
BradleyS
Moderator
Posts: 1354
Joined: Thu Aug 09, 2007 12:16 pm

Re: Cpu overheating in core i7 7th gen

Post by BradleyS » Tue May 15, 2018 12:12 pm

You really should handle your hardware cooling issue instead of searching for a software solution.

Tech_geek83
Posts: 5
Joined: Tue May 15, 2018 12:04 pm

Re: Cpu overheating in core i7 7th gen

Post by Tech_geek83 » Tue May 15, 2018 12:14 pm

i understand but it is in a asus ROG Gaming Laptop

User avatar
BradleyS
Moderator
Posts: 1354
Joined: Thu Aug 09, 2007 12:16 pm

Re: Cpu overheating in core i7 7th gen

Post by BradleyS » Tue May 15, 2018 12:16 pm

I’m not sure that matters, but perhaps contact ASUS and ask them why the machine is failing under load.

Tech_geek83
Posts: 5
Joined: Tue May 15, 2018 12:04 pm

Re: Cpu overheating in core i7 7th gen

Post by Tech_geek83 » Tue May 15, 2018 12:18 pm

just like right now it is running about 86 degrees celsius

mduell
Veteran User
Posts: 6100
Joined: Sat Apr 21, 2007 8:54 pm

Re: Cpu overheating in core i7 7th gen

Post by mduell » Tue May 15, 2018 12:24 pm

Yep, defective cooling.

Tech_geek83
Posts: 5
Joined: Tue May 15, 2018 12:04 pm

Re: Cpu overheating in core i7 7th gen

Post by Tech_geek83 » Tue May 15, 2018 12:25 pm

Thank you very much

Woodstock
Veteran User
Posts: 2707
Joined: Tue Aug 27, 2013 6:39 am

Re: Cpu overheating in core i7 7th gen

Post by Woodstock » Tue May 15, 2018 1:17 pm

The "asus ROG Gaming Laptop" is designed for superior GRAPHICS processor specs, not for running at 100% CPU for long periods of time. There are very few laptops that have both fast CPUs and enough cooling to support them for more than a few seconds at full speed. Especially those designed to be thin... no room for chips AND heat sinks AND fans.

You might want to consider using the Quick Sync Video capabilities of the processor. Your encodes won't be as "efficient" as those done by x264, but the CPU load will be considerably less. Your logs will show whether or not the video drivers supplied with the machine enable the QSV hardware.

Tech_geek83
Posts: 5
Joined: Tue May 15, 2018 12:04 pm

Re: Cpu overheating in core i7 7th gen

Post by Tech_geek83 » Tue May 15, 2018 1:21 pm

HandBrake 1.1.0 (2018040700) - 64bit
OS: Microsoft Windows NT 10.0.17134.0 - 64bit
CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz
Ram: 16268 MB,
GPU Information:
mv video hook driver2 - 6.0.1.0
NVIDIA GeForce GTX 1050 Ti - 22.21.13.8573
Intel(R) HD Graphics 630 - 23.20.16.4849
Screen: 1920x1080
Temp Dir: C:\Users\tcraw\AppData\Local\Temp\
Install Dir: C:\Program Files\HandBrake
Data Dir: C:\Users\tcraw\AppData\Roaming\HandBrake Team\HandBrake\1.1.0.0

-------------------------------------------


# Starting Encode ...

[09:20:18] hb_init: starting libhb thread
[09:20:18] 1 job(s) to process
[09:20:18] json job:
{
"Audio": {
"AudioList": [
{
"Bitrate": 160,
"DRC": 0.0,
"Encoder": 65536,
"Gain": 0.0,
"Mixdown": 4,
"NormalizeMixLevel": false,
"Samplerate": 48000,
"Track": 0,
"DitherMethod": 0
}
],
"CopyMask": [
1073807360,
1073743872,
1074003968,
1073750016,
1090519040,
1074790400,
1074266112,
1107296256
],
"FallbackEncoder": 2048
},
"Destination": {
"ChapterList": [
{
"Name": "Chapter 1"
}
],
"ChapterMarkers": true,
"AlignAVStart": false,
"File": "C:\\Users\\tcraw\\Documents\\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1-1.m4v",
"Mp4Options": {
"IpodAtom": false,
"Mp4Optimize": false
},
"Mux": 131072
},
"Filters": {
"FilterList": [
{
"ID": 4,
"Settings": {
"mode": "7"
}
},
{
"ID": 3,
"Settings": {
"block-height": "16",
"block-thresh": "40",
"block-width": "16",
"filter-mode": "2",
"mode": "3",
"motion-thresh": "1",
"spatial-metric": "2",
"spatial-thresh": "1"
}
},
{
"ID": 11,
"Settings": {
"crop-bottom": "0",
"crop-left": "0",
"crop-right": "0",
"crop-top": "0",
"height": "296",
"width": "712"
}
},
{
"ID": 6,
"Settings": {
"mode": "2",
"rate": "27000000/900000"
}
}
]
},
"PAR": {
"Num": 1,
"Den": 1
},
"Metadata": {},
"SequenceID": 0,
"Source": {
"Angle": 1,
"Range": {
"Type": "chapter",
"Start": 1,
"End": 1
},
"Title": 1,
"Path": "C:\\Users\\tcraw\\Desktop\\Samsung TV\\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1.m4v"
},
"Subtitle": {
"Search": {
"Burn": true,
"Default": false,
"Enable": true,
"Forced": true
},
"SubtitleList": []
},
"Video": {
"Encoder": 65536,
"Level": "4.0",
"TwoPass": false,
"Turbo": false,
"ColorMatrixCode": 0,
"Options": "",
"Preset": "fast",
"Profile": "main",
"Quality": 22.0,
"HWDecode": false,
"QSV": {
"Decode": false,
"AsyncDepth": 0
}
}
}
[09:20:18] CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz
[09:20:18] - Intel microarchitecture Kaby Lake
[09:20:18] - logical processor count: 8
[09:20:18] Intel Quick Sync Video support: yes
[09:20:18] - Intel Media SDK hardware: API 1.25 (minimum: 1.3)
[09:20:18] - H.264 encoder: yes
[09:20:18] - preferred implementation: hardware (any) via D3D11
[09:20:18] - capabilities (hardware): breftype icq+la+i+downs vsinfo opt1 opt2+mbbrc+extbrc+trellis+ib_adapt+nmpslice
[09:20:18] - H.265 encoder: yes (8bit: yes, 10bit: yes)
[09:20:18] - preferred implementation: hardware (any) via D3D11
[09:20:18] - capabilities (hardware): bpyramid icq vsinfo opt1
[09:20:18] hb_scan: path=C:\Users\tcraw\Desktop\Samsung TV\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1.m4v, title_index=1
udfread ERROR: ECMA 167 Volume Recognition failed
src/libbluray/disc/disc.c:323: failed opening UDF image C:\Users\tcraw\Desktop\Samsung TV\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1.m4v
src/libbluray/disc/disc.c:424: error opening file BDMV\index.bdmv
src/libbluray/disc/disc.c:424: error opening file BDMV\BACKUP\index.bdmv
[09:20:18] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.3
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[09:20:19] dvd: not a dvd - trying as a stream/file instead
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\Users\tcraw\Desktop\Samsung TV\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1.m4v':
Metadata:
major_brand : mp42
minor_version : 512
compatible_brands: isomiso2avc1mp41
creation_time : 2018-05-15 12:12:04
encoder : HandBrake 1.1.0 2018040700
Duration: 02:05:40.56, start: 0.012333, bitrate: 649 kb/s
Stream #0:0(und): Video: h264 (Main) [avc1 / 0x31637661]
yuv420p, tv, smpte170m/smpte170m/bt709
712x296 [PAR 1:1 DAR 89:37], 483 kb/s
23.98 fps, 90k tbn (default)
Metadata:
creation_time : 2018-05-15 12:12:04
handler_name : VideoHandler
Stream #0:1(eng): Audio: aac (LC) [mp4a / 0x6134706D]
48000 Hz, stereo, fltp, 159 kb/s (default)
Metadata:
creation_time : 2018-05-15 12:12:04
handler_name : Stereo
[09:20:19] scan: decoding previews for title 1
[09:20:19] scan: audio 0x1: aac, rate=48000Hz, bitrate=159956 English (AAC) (2.0 ch)
[09:20:19] scan: 10 previews, 712x296, 23.976 fps, autocrop = 0/0/0/0, aspect 2.41:1, PAR 1:1
[09:20:19] scan: supported video decoders: avcodec qsv
[09:20:19] libhb: scan thread found 1 valid title(s)
[09:20:19] Skipping subtitle scan. No suitable subtitle tracks.
[09:20:19] starting job
[09:20:19] decomb filter thread started for segment 0
[09:20:19] decomb filter thread started for segment 1
[09:20:19] decomb filter thread started for segment 2
[09:20:19] decomb check thread started for segment 3
[09:20:19] decomb filter thread started for segment 4
[09:20:19] decomb filter thread started for segment 5
[09:20:19] mask filter thread started for segment 3
[09:20:19] decomb filter thread started for segment 7
[09:20:19] decomb check thread started for segment 0
[09:20:19] decomb check thread started for segment 1
[09:20:19] decomb check thread started for segment 2
[09:20:19] decomb filter thread started for segment 3
[09:20:19] decomb check thread started for segment 4
[09:20:19] decomb check thread started for segment 5
[09:20:19] decomb check thread started for segment 6
[09:20:19] decomb check thread started for segment 7
[09:20:19] mask filter thread started for segment 1
[09:20:19] mask filter thread started for segment 0
[09:20:19] yadif thread started for segment 4
[09:20:19] yadif thread started for segment 5
[09:20:19] mask filter thread started for segment 4
[09:20:19] work: track 1, dithering not supported by codec
[09:20:19] mask filter thread started for segment 5
[09:20:19] work: only 1 chapter, disabling chapter markers
[09:20:19] mask filter thread started for segment 6
[09:20:19] job configuration:
[09:20:19] * source
[09:20:19] + C:\Users\tcraw\Desktop\Samsung TV\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1.m4v
[09:20:19] + title 1, chapter(s) 1 to 1
[09:20:19] + container: mov,mp4,m4a,3gp,3g2,mj2
[09:20:19] + data rate: 649 kbps
[09:20:19] * destination
[09:20:19] + C:\Users\tcraw\Documents\Saving Mr. Banks (2013) Bdrip X265 Eng-Ita Aac Subs -Shiv@-1-1.m4v
[09:20:19] + container: MPEG-4 (libavformat)
[09:20:19] mask filter thread started for segment 7
[09:20:19] * video track
[09:20:19] + decoder: h264
[09:20:19] + bitrate 483 kbps
[09:20:19] + filters
[09:20:19] mask erode thread started for segment 0
[09:20:19] + Comb Detect (mode=3:spatial-metric=2:motion-thresh=1:spatial-thresh=1:filter-mode=2:block-thresh=40:block-width=16:block-height=16)
[09:20:19] + Decomb (mode=39)
[09:20:19] mask erode thread started for segment 1
[09:20:19] + Framerate Shaper (mode=2:rate=27000000/900000)
[09:20:19] + frame rate: 23.976 fps -> peak rate limited to 30.000 fps
[09:20:19] mask erode thread started for segment 2
[09:20:19] + Crop and Scale (width=712:height=296:crop-top=0:crop-bottom=0:crop-left=0:crop-right=0)
[09:20:19] + source: 712 * 296, crop (0/0/0/0): 712 * 296, scale: 712 * 296
[09:20:19] + Output geometry
[09:20:19] + storage dimensions: 712 x 296
[09:20:19] + pixel aspect ratio: 1 : 1
[09:20:19] + display dimensions: 712 x 296
[09:20:19] + encoder: H.264 (libx264)
[09:20:19] mask erode thread started for segment 3
[09:20:19] + preset: fast
[09:20:19] + profile: main
[09:20:19] + level: 4.0
[09:20:19] + quality: 22.00 (RF)
[09:20:19] mask erode thread started for segment 4
[09:20:19] * audio track 1
[09:20:19] + decoder: English (AAC) (2.0 ch) (track 1, id 0x1)
[09:20:19] mask erode thread started for segment 5
[09:20:19] + bitrate: 159 kbps, samplerate: 48000 Hz
[09:20:19] + mixdown: Stereo
[09:20:19] + encoder: AAC (libavcodec)
[09:20:19] mask erode thread started for segment 6
[09:20:19] + bitrate: 160 kbps, samplerate: 48000 Hz
[09:20:19] mask erode thread started for segment 7
[09:20:19] mask dilate thread started for segment 0
[09:20:19] mask dilate thread started for segment 1
[09:20:19] mask dilate thread started for segment 2
[09:20:19] mask dilate thread started for segment 3
[09:20:19] mask dilate thread started for segment 5
[09:20:19] mask dilate thread started for segment 4
[09:20:19] mask dilate thread started for segment 7
[09:20:19] mask dilate thread started for segment 6
[09:20:19] yadif thread started for segment 0
[09:20:19] yadif thread started for segment 1
[09:20:19] yadif thread started for segment 2
[09:20:19] yadif thread started for segment 3
[09:20:19] mask filter thread started for segment 2
[09:20:19] decomb filter thread started for segment 6
[09:20:19] yadif thread started for segment 6
[09:20:19] yadif thread started for segment 7
[09:20:19] sync: expecting 180792 video frames
[09:20:19] encx264: min-keyint: 24, keyint: 240
[09:20:19] encx264: encoding at constant RF 22.000000
[09:20:19] encx264: unparsed options: level=4.0:ref=2:8x8dct=0:weightp=1:subme=6:vbv-bufsize=25000:vbv-maxrate=20000:rc-lookahead=30
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x264 [info]: profile Main, level 4.0
[09:20:19] sync: first pts video is 0
[09:20:19] sync: "Chapter 1" (1) at frame 1 time 0
[09:20:19] sync: first pts audio 0x1 is 810

User avatar
BradleyS
Moderator
Posts: 1354
Joined: Thu Aug 09, 2007 12:16 pm

Re: Cpu overheating in core i7 7th gen

Post by BradleyS » Tue May 15, 2018 2:06 pm

Locking for rule violations.

Locked