HandBrake 1.0.x Discussion Thread
HandBrake 1.0.x Discussion Thread
Discuss the 1.0.0 release here.
if you do find a bug, it's fine to mention it here, but please raise it in the bugs forum our out GitHub issue tracker. We don't want issues getting lost in general conversation.
if you do find a bug, it's fine to mention it here, but please raise it in the bugs forum our out GitHub issue tracker. We don't want issues getting lost in general conversation.
Re: HandBrake 1.0.0 Discussion Thread
Quicksync test encode with h265 results in a freeze. There are no extra options in use.
Code: Select all
HandBrake 1.0.0 (2016122400) - 64bit
OS: Microsoft Windows NT 10.0.14393.0 - 64bit
CPU: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz
Ram: 16250 MB,
GPU Information:
Intel(R) HD Graphics 630 - 21.20.16.4551
NVIDIA GeForce GTX 1080 - 21.21.13.7648
Screen: 1920x1080
Temp Dir: C:\Users\Michael\AppData\Local\Temp\
Install Dir: C:\Program Files\HandBrake
Data Dir: C:\Users\Michael\AppData\Roaming\HandBrake Team\HandBrake\1.0.0.0
-------------------------------------------
# Starting Encode ...
[17:20:10] hb_init: starting libhb thread
[17:20:10] 1 job(s) to process
[17:20:10] json job:
{
"Audio": {
"AudioList": [],
"CopyMask": [
1073807360,
1073743872,
1074003968,
1073750016,
1090519040,
1074790400,
1074266112,
1107296256
],
"FallbackEncoder": 2048
},
"Destination": {
"ChapterList": [
{
"Name": "Chapter 1"
}
],
"ChapterMarkers": true,
"File": "D:\\Quicksync\\Handbrake Output KBL\\handbrake_new.mp4",
"Mp4Options": {
"IpodAtom": false,
"Mp4Optimize": false
},
"Mux": 131072
},
"Filters": {
"FilterList": [
{
"ID": 11,
"Settings": {
"crop-bottom": "0",
"crop-left": "0",
"crop-right": "0",
"crop-top": "0",
"height": "1080",
"width": "1920"
}
},
{
"ID": 6,
"Settings": {
"mode": "1"
}
}
]
},
"PAR": {
"Num": 1,
"Den": 1
},
"Metadata": {},
"SequenceID": 0,
"Source": {
"Angle": 1,
"Range": {
"Type": "chapter",
"Start": 1,
"End": 1
},
"Title": 1,
"Path": "D:\\Quicksync\\7_Intel_Demo_Clip2.mp4"
},
"Subtitle": {
"Search": {
"Burn": true,
"Default": false,
"Enable": true,
"Forced": false
},
"SubtitleList": []
},
"Video": {
"Encoder": 512,
"Level": "auto",
"Bitrate": 2000,
"TwoPass": false,
"Turbo": false,
"ColorMatrixCode": 0,
"Options": "",
"Preset": "speed",
"Profile": "auto",
"OpenCL": false,
"HWDecode": false,
"QSV": {
"Decode": true,
"AsyncDepth": 0
}
}
}
[17:20:10] CPU: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz
[17:20:10] - logical processor count: 8
[17:20:10] OpenCL device #1: NVIDIA Corporation GeForce GTX 1080
[17:20:10] - OpenCL version: 1.2 CUDA
[17:20:10] - driver version: 376.48
[17:20:10] - device type: GPU
[17:20:10] - supported: no
[17:20:10] OpenCL device #2: Intel(R) Corporation Intel(R) HD Graphics 630
[17:20:10] - OpenCL version: 2.1
[17:20:10] - driver version: 21.20.16.4551
[17:20:10] - device type: GPU
[17:20:10] - supported: YES
[17:20:10] Intel Quick Sync Video support: yes
[17:20:10] - Intel Media SDK hardware: API 1.19 (minimum: 1.3)
[17:20:10] - Intel Media SDK software: API 1.19 (minimum: 1.3)
[17:20:10] - H.264 encoder: yes
[17:20:10] - preferred implementation: hardware (any)
[17:20:10] - capabilities (hardware): breftype icq+la+i+downs vsinfo opt1 opt2+mbbrc+extbrc+trellis+ib_adapt+nmpslice
[17:20:10] - capabilities (software): bpyramid vsinfo opt1 opt2
[17:20:10] - H.265 encoder: yes
[17:20:10] - preferred implementation: hardware (any)
[17:20:10] - capabilities (hardware): bpyramid vsinfo opt1
[17:20:10] hb_scan: path=D:\Quicksync\7_Intel_Demo_Clip2.mp4, title_index=1
udfread ERROR: ECMA 167 Volume Recognition failed
src/libbluray/disc/disc.c:274: failed opening UDF image D:\Quicksync\7_Intel_Demo_Clip2.mp4
src/libbluray/disc/disc.c:352: error opening file BDMV\index.bdmv
src/libbluray/disc/disc.c:352: error opening file BDMV\BACKUP\index.bdmv
[17:20:10] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.1
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[17:20:10] dvd: not a dvd - trying as a stream/file instead
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'D:\Quicksync\7_Intel_Demo_Clip2.mp4':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2avc1mp41
encoder : Lavf54.36.100
Duration: 00:08:07.83, start: 0.000000, bitrate: 24613 kb/s
Stream #0:0(eng): Video: h264 (High) [avc1 / 0x31637661]
yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 24610 kb/s
24 fps, 12288 tbn (default)
Metadata:
handler_name : VideoHandler
[17:20:10] scan: decoding previews for title 1
[17:20:12] scan: 10 previews, 1920x1080, 24.000 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[17:20:12] scan: supported video decoders: avcodec qsv
[17:20:12] libhb: scan thread found 1 valid title(s)
[17:20:12] Skipping subtitle scan. No suitable subtitle tracks.
[17:20:12] starting job
[17:20:12] work: only 1 chapter, disabling chapter markers
[17:20:12] job configuration:
[17:20:12] * source
[17:20:12] + D:\Quicksync\7_Intel_Demo_Clip2.mp4
[17:20:12] + title 1, chapter(s) 1 to 1
[17:20:12] + container: mov,mp4,m4a,3gp,3g2,mj2
[17:20:12] + data rate: 24613 kbps
[17:20:12] * destination
[17:20:12] + D:\Quicksync\Handbrake Output KBL\handbrake_new.mp4
[17:20:12] + container: MPEG-4 (libavformat)
[17:20:12] * video track
[17:20:12] + decoder: h264_qsv
[17:20:12] + bitrate 24610 kbps
[17:20:12] + filters
[17:20:12] + Framerate Shaper (mode=1)
[17:20:12] + frame rate: 24.000 fps -> constant 24.000 fps
[17:20:12] + Crop and Scale (width=1920:height=1080:crop-top=0:crop-bottom=0:crop-left=0:crop-right=0)
[17:20:12] + source: 1920 * 1080, crop (0/0/0/0): 1920 * 1080, scale: 1920 * 1080
[17:20:12] + Output geometry
[17:20:12] + storage dimensions: 1920 x 1080
[17:20:12] + pixel aspect ratio: 1 : 1
[17:20:12] + display dimensions: 1920 x 1080
[17:20:12] + encoder: H.265 (Intel Media SDK)
[17:20:12] + preset: speed
[17:20:12] + profile: auto
[17:20:12] + level: auto
[17:20:12] + bitrate: 2000 kbps, pass: 0
[17:20:12] sync: expecting 11707 video frames
[17:20:12] encqsvInit: using encode-only path
[17:20:12] encqsvInit: H.265/HEVC Main profile @ level 4.0
[17:20:12] encqsvInit: TargetUsage 7 AsyncDepth 5
[17:20:12] encqsvInit: GopRefDist 3 GopPicSize 24 NumRefFrame 2
[17:20:12] encqsvInit: BFramesMax 2 BRefType off
[17:20:12] encqsvInit: RateControlMethod VBR TargetKbps 2000 MaxKbps 2000 BufferSizeInKB 500 InitialDelayInKB 250
[17:20:12] sync: first pts video is 0
[17:20:12] sync: "Chapter 1" (1) at frame 1 time 0
[17:20:12] qsv_enc_init: using 'hardware (2)' implementation, API: 1.19
Error code -17, hb_qsv_wait_on_sync 602
Re: HandBrake 1.0.0 Discussion Thread
I guess I'll spend Christmas evening figuring out how to compile so I can get off 0.10.3 and still have a decent AAC encoder on Windows.
-
- Posts: 32
- Joined: Wed Jul 06, 2016 5:13 pm
Re: HandBrake 1.0.0 Discussion Thread
I know this has nothing to do with functionality, but the About page for 1.0.0, is still 0.10.5.
Re: HandBrake 1.0.0 Discussion Thread
Are you sure your running 1.0.0? Try a clean removal / re-install since it definatly shouldn't be saying that.
-
- Posts: 32
- Joined: Wed Jul 06, 2016 5:13 pm
Re: HandBrake 1.0.0 Discussion Thread
I've confirmed it twice...
The installer mentions that you have an earlier version, and to uninstall it.. so that's what I did.
Checked the About page to make sure it was 1.0.0. Wasn't.
Uninstalled via Programs/Features, restarted... deleted the program I downloaded, re-downloaded and installed.
Here's an SS of P/F side by side with the About page.
The installer mentions that you have an earlier version, and to uninstall it.. so that's what I did.
Checked the About page to make sure it was 1.0.0. Wasn't.
Uninstalled via Programs/Features, restarted... deleted the program I downloaded, re-downloaded and installed.
Here's an SS of P/F side by side with the About page.
Re: HandBrake 1.0.0 Discussion Thread
That is most definatly not 1.0.0. That's still 0.10.5 so you must have another copy installed and your shortcut is pointing to the wrong place.
Uninstall, verify there is no copies in program files, then install fresh.
Uninstall, verify there is no copies in program files, then install fresh.
-
- Posts: 3
- Joined: Mon Dec 26, 2016 1:35 pm
Re: HandBrake 1.0.0 Discussion Thread
First congratulation on 1.0 release.
I have a question about VP9. While encoding I have a cpu utilization about only 55% on a i7-3770K (clocked at 4,4 GHz). Am I doing something wrong or is because of still to be improved optimization?
Regards
I have a question about VP9. While encoding I have a cpu utilization about only 55% on a i7-3770K (clocked at 4,4 GHz). Am I doing something wrong or is because of still to be improved optimization?
Regards
Re: HandBrake 1.0.0 Discussion Thread
We'd need to see a log to see exactly what your doing to make sure your not bottlenecking it by another setting, but, VP9 Encoding will be slow. Google appears to optimise for their "customers". I.e YouTube. Not general purpose encoding as we do. This is one of the reasons we've delayed adding this feature for so long. It's just really slow. It's "usable" if you have high end hardware. If you don't, patience is going to be a key factor
Atleast with x265, it's under very active development and making fairly significant strides. They borrow a lot from the x264 project as well which helps a lot.
Atleast with x265, it's under very active development and making fairly significant strides. They borrow a lot from the x264 project as well which helps a lot.
-
- Posts: 3
- Joined: Mon Dec 26, 2016 1:35 pm
Re: HandBrake 1.0.0 Discussion Thread
I just was curious about VP9 so I tried it. Slow as can be, yeah.
Code: Select all
HandBrake 1.0.0 (2016122400) - 64bit
OS: Microsoft Windows NT 10.0.14393.0 - 64bit
CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
Ram: 16269 MB,
GPU Information:
AMD Radeon (TM) R9 Fury Series - 21.19.384.0
Intel(R) HD Graphics 4000 - 10.18.10.4358
Screen: 1920x1080
Temp Dir: C:\Users\ABS\AppData\Local\Temp\
Install Dir: C:\Program Files\HandBrake
Data Dir: C:\Users\ABS\AppData\Roaming\HandBrake Team\HandBrake\1.0.0.0
-------------------------------------------
# Starting Encode ...
[14:42:55] hb_init: starting libhb thread
[14:42:55] 1 job(s) to process
[14:42:55] json job:
{
"Audio": {
"AudioList": [
{
"DRC": 0.0,
"Encoder": 1125984256,
"Gain": 0.0,
"Mixdown": -1,
"NormalizeMixLevel": false,
"Samplerate": 0,
"Track": 0,
"DitherMethod": 0
}
],
"CopyMask": [
1073807360,
1073743872,
1074003968,
1073750016,
1090519040,
1074790400,
1074266112,
1107296256
],
"FallbackEncoder": 2048
},
"Destination": {
"ChapterList": [
{
"Name": "Chapter 1"
}
],
"ChapterMarkers": true,
"File": "D:\\Newsbin\\SONARR\\Stan Against Evil\\Stan Against Evil - S01e01 - Dig Me Up Dig Me Down - Webdl-1080p - Rtn-1.mkv",
"Mp4Options": {
"IpodAtom": false,
"Mp4Optimize": false
},
"Mux": 2097152
},
"Filters": {
"FilterList": [
{
"ID": 11,
"Settings": {
"crop-bottom": "0",
"crop-left": "0",
"crop-right": "0",
"crop-top": "0",
"height": "1076",
"width": "1916"
}
},
{
"ID": 6,
"Settings": {
"mode": "1"
}
}
]
},
"PAR": {
"Num": 1,
"Den": 1
},
"Metadata": {},
"SequenceID": 0,
"Source": {
"Angle": 1,
"Range": {
"Type": "chapter",
"Start": 1,
"End": 1
},
"Title": 1,
"Path": "D:\\Newsbin\\SONARR\\Stan Against Evil\\Stan Against Evil - S01E01 - Dig Me Up Dig Me Down - WEBDL-1080p - RTN.mkv"
},
"Subtitle": {
"Search": {
"Burn": true,
"Default": false,
"Enable": true,
"Forced": false
},
"SubtitleList": []
},
"Video": {
"Encoder": 128,
"Level": "auto",
"TwoPass": false,
"Turbo": false,
"ColorMatrixCode": 0,
"Options": "qmin=0:qmax=30",
"Preset": "fast",
"Quality": 22.0,
"OpenCL": false,
"HWDecode": false,
"QSV": {
"Decode": true,
"AsyncDepth": 0
}
}
}
[14:42:55] CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
[14:42:55] - Intel microarchitecture Ivy Bridge
[14:42:55] - logical processor count: 8
[14:42:55] OpenCL device #1: Intel(R) Corporation Intel(R) HD Graphics 4000
[14:42:55] - OpenCL version: 1.2
[14:42:55] - driver version: 10.18.10.4358
[14:42:55] - device type: GPU
[14:42:55] - supported: no
[14:42:55] OpenCL device #2: Advanced Micro Devices, Inc. Fiji
[14:42:55] - OpenCL version: 2.0 AMD-APP (2236.9)
[14:42:55] - driver version: 2236.9
[14:42:55] - device type: GPU
[14:42:55] - supported: YES
[14:42:55] Intel Quick Sync Video support: yes
[14:42:55] - Intel Media SDK hardware: API 1.11 (minimum: 1.3)
[14:42:55] - H.264 encoder: yes
[14:42:55] - preferred implementation: hardware (any)
[14:42:55] - capabilities (hardware): vsinfo opt1 opt2+extbrc+ib_adapt+nmpslice
[14:42:55] - H.265 encoder: no
[14:42:55] hb_scan: path=D:\Newsbin\SONARR\Stan Against Evil\Stan Against Evil - S01E01 - Dig Me Up Dig Me Down - WEBDL-1080p - RTN.mkv, title_index=1
udfread ERROR: ECMA 167 Volume Recognition failed
src/libbluray/disc/disc.c:274: failed opening UDF image D:\Newsbin\SONARR\Stan Against Evil\Stan Against Evil - S01E01 - Dig Me Up Dig Me Down - WEBDL-1080p - RTN.mkv
src/libbluray/disc/disc.c:352: error opening file BDMV\index.bdmv
src/libbluray/disc/disc.c:352: error opening file BDMV\BACKUP\index.bdmv
[14:42:55] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.1
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[14:42:55] dvd: not a dvd - trying as a stream/file instead
Input #0, matroska,webm, from 'D:\Newsbin\SONARR\Stan Against Evil\Stan Against Evil - S01E01 - Dig Me Up Dig Me Down - WEBDL-1080p - RTN.mkv':
Duration: 00:21:50.08, start: 0.000000, bitrate: N/A
Stream #0:0(eng): Video: h264 (High)
yuv420p, tv, bt709/bt709/bt709
1916x1076 [PAR 1:1 DAR 479:269], PAR 1:1 DAR 479:269
23.98 fps, 1k tbn (default)
Stream #0:1(eng): Audio: ac3
48000 Hz, 5.1, fltp, 384 kb/s (default)
Stream #0:2(eng): Subtitle: srt
[14:42:55] scan: decoding previews for title 1
[14:42:55] scan: audio 0x1: ac3, rate=48000Hz, bitrate=384000 English (AC3) (5.1 ch)
[14:42:56] scan: 10 previews, 1916x1076, 23.976 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[14:42:56] scan: supported video decoders: avcodec qsv
[14:42:56] libhb: scan thread found 1 valid title(s)
[14:42:56] Skipping subtitle scan. No suitable subtitle tracks.
[14:42:56] starting job
[14:42:56] Auto Passthru: allowed codecs are AAC, AC3, E-AC3, TrueHD, DTS, DTS-HD, MP3, FLAC
[14:42:56] Auto Passthru: fallback is AC3
[14:42:56] Auto Passthru: using AC3 Passthru for track 1
[14:42:56] work: only 1 chapter, disabling chapter markers
[14:42:56] job configuration:
[14:42:56] * source
[14:42:56] + D:\Newsbin\SONARR\Stan Against Evil\Stan Against Evil - S01E01 - Dig Me Up Dig Me Down - WEBDL-1080p - RTN.mkv
[14:42:56] + title 1, chapter(s) 1 to 1
[14:42:56] + container: matroska,webm
[14:42:56] * destination
[14:42:56] + D:\Newsbin\SONARR\Stan Against Evil\Stan Against Evil - S01e01 - Dig Me Up Dig Me Down - Webdl-1080p - Rtn-1.mkv
[14:42:56] + container: Matroska (libavformat)
[14:42:56] * video track
[14:42:56] + decoder: h264_qsv
[14:42:56] + filters
[14:42:56] + Framerate Shaper (mode=1)
[14:42:56] + frame rate: 23.976 fps -> constant 23.976 fps
[14:42:56] + Crop and Scale (width=1916:height=1076:crop-top=0:crop-bottom=0:crop-left=0:crop-right=0)
[14:42:56] + source: 1916 * 1076, crop (0/0/0/0): 1916 * 1076, scale: 1916 * 1076
[14:42:56] + Output geometry
[14:42:56] + storage dimensions: 1916 x 1076
[14:42:56] + pixel aspect ratio: 1 : 1
[14:42:56] + display dimensions: 1916 x 1076
[14:42:56] + encoder: VP9 (libvpx)
[14:42:56] + preset: fast
[14:42:56] + options: qmin=0:qmax=30
[14:42:56] + quality: 22.00 (CQ)
[14:42:56] * audio track 1
[14:42:56] + decoder: English (AC3) (5.1 ch) (track 1, id 0x1)
[14:42:56] + bitrate: 384 kbps, samplerate: 48000 Hz
[14:42:56] + AC3 Passthru
[14:42:56] sync: expecting 31410 video frames
[14:42:56] encavcodecInit: VP9 encoder
[14:42:56] encavcodec: encoding at CQ 22.00
[14:42:56] encavcodec: encoding with stored aspect 1/1
[14:42:56] sync: first pts video is 0
[14:42:56] sync: "Chapter 1" (1) at frame 1 time 0
[14:42:56] sync: first pts audio 0x1 is 0
Re: HandBrake 1.0.0 Discussion Thread
You might try turning off qsv deocde in preferences. Not sure if it'll help or make things worse in this scenario. But nothing in particular there holding it back otherwise.
-
- Posts: 3
- Joined: Mon Dec 26, 2016 1:35 pm
- JohnAStebbins
- HandBrake Team
- Posts: 5723
- Joined: Sat Feb 09, 2008 7:21 pm
Re: HandBrake 1.0.0 Discussion Thread
I suggest we should move the VP 9 discussion here viewtopic.php?f=26&t=27343&hilit=vp9
There are answers to some of your questions already in that thread and a documented series of benchmarks as VP9 development progressed. This post in particular is relevant to improving CPU utilization viewtopic.php?f=26&t=27343&hilit=vp9#p147934
There are answers to some of your questions already in that thread and a documented series of benchmarks as VP9 development progressed. This post in particular is relevant to improving CPU utilization viewtopic.php?f=26&t=27343&hilit=vp9#p147934
-
- Posts: 32
- Joined: Wed Jul 06, 2016 5:13 pm
Re: HandBrake 1.0.0 Discussion Thread
and... that's exactly what I had to do.s55 wrote:That is most definatly not 1.0.0. That's still 0.10.5 so you must have another copy installed and your shortcut is pointing to the wrong place.
Uninstall, verify there is no copies in program files, then install fresh.
After uninstalling 1, I downloaded 0.10, reinstalled, then uninstalled it. Found a leftover folder Program Files x86, removed that, and then restarted. Installed 1.0 and it's working fine now.
Thanks for the assist!
Re: HandBrake 1.0.0 Discussion Thread
I just registered to ask this question:
What happened to HandbrakeCLI.exe?
I've used it as part of an automated process chain for downloading newly released videos, transcoding them, and uploading them to OneDrive so I could stream them on my phone. All without having to interact with my PC.
My automated setup worked like this:
- Torrent client looks for new episodes via RSS.
- Once the download is complete, torrent client calls a batch app I've written.
- The batch app calls HandbrakeCLI and provides it with the video.
- If HandbrakeCLI exits with errors (which happened from time to time), the batch app will retry up to 5 times (sweet spot, where even the most tenacious transcode finally succeeds)
- If the batch app is already running, it will queue the video and wait for the previous HandbrakeCLI process to end before transcoding the next video.
The batch app also hooks up to HandbrakeCLI's console output, so I can see the current progress and still have a record of what happened, should the encode have failed more than 5 times.
How do I use the CLI now? Do I need to create some kind of preset.json and call Handbrake.exe instead?
Hopefully, I don't have to make too many changes for my old setup to keep working. In the worst case, I'll have to revert to an older version of Handbrake... Hopefully that won't be necessary.
PS: Your registration system is out of date. I had to answer "Is HandBrake 0.10.5 the current version of HandBrake?" with "yes", even though it's obviously wrong.
What happened to HandbrakeCLI.exe?
I've used it as part of an automated process chain for downloading newly released videos, transcoding them, and uploading them to OneDrive so I could stream them on my phone. All without having to interact with my PC.
My automated setup worked like this:
- Torrent client looks for new episodes via RSS.
- Once the download is complete, torrent client calls a batch app I've written.
- The batch app calls HandbrakeCLI and provides it with the video.
- If HandbrakeCLI exits with errors (which happened from time to time), the batch app will retry up to 5 times (sweet spot, where even the most tenacious transcode finally succeeds)
- If the batch app is already running, it will queue the video and wait for the previous HandbrakeCLI process to end before transcoding the next video.
The batch app also hooks up to HandbrakeCLI's console output, so I can see the current progress and still have a record of what happened, should the encode have failed more than 5 times.
How do I use the CLI now? Do I need to create some kind of preset.json and call Handbrake.exe instead?
Hopefully, I don't have to make too many changes for my old setup to keep working. In the worst case, I'll have to revert to an older version of Handbrake... Hopefully that won't be necessary.
PS: Your registration system is out of date. I had to answer "Is HandBrake 0.10.5 the current version of HandBrake?" with "yes", even though it's obviously wrong.
Re: HandBrake 1.0.0 Discussion Thread
Still there as a seperate download. It's just not included with the Windows GUI as it isn't needed there.What happened to HandbrakeCLI.exe?
I've used it as part of an automated process chain for downloading newly released videos, transcoding them, and uploading them to OneDrive so I could stream them on my phone. All without having to interact with my PC.
https://handbrake.fr/downloads2.php
CLI works much the same way as it did before. HandBrakeCLI --help to get the options.
Thanks for the heads up. Fixed.PS: Your registration system is out of date. I had to answer "Is HandBrake 0.10.5 the current version of HandBrake?" with "yes", even though it's obviously wrong.
Re: HandBrake 1.0.0 Discussion Thread
Works like a charm, thanks!s55 wrote:Still there as a seperate download. It's just not included with the Windows GUI as it isn't needed there.What happened to HandbrakeCLI.exe?
I've used it as part of an automated process chain for downloading newly released videos, transcoding them, and uploading them to OneDrive so I could stream them on my phone. All without having to interact with my PC.
- JohnAStebbins
- HandBrake Team
- Posts: 5723
- Joined: Sat Feb 09, 2008 7:21 pm
Re: HandBrake 1.0.0 Discussion Thread
Fixed the question or fixed the answer? I'm surprised we got as far as 0.10.5 before this happening.s55 wrote:Thanks for the heads up. Fixed.PS: Your registration system is out of date. I had to answer "Is HandBrake 0.10.5 the current version of HandBrake?" with "yes", even though it's obviously wrong.
Re: HandBrake 1.0.0 Discussion Thread
Fixed the question. I think it was something about the spelling of Canada before. So it's probably a more recent change.
-
- Posts: 1
- Joined: Tue Dec 27, 2016 12:42 am
Re: HandBrake 1.0.0 Discussion Thread
Not really sure if this a bug but Handbrake 1.0.0 seems to be using the old x264 version at least according to MediaInfo:
I'm on Ubuntu 14.04 maybe I need to remove some older files like x264 and reinstall? (I don't know where they are supposed to be located though)
Writing application :
HandBrake 1.0.0 2016122400
It should be x264 148 r2708Writing library :
x264 core 142 r2491 24e4fed
I'm on Ubuntu 14.04 maybe I need to remove some older files like x264 and reinstall? (I don't know where they are supposed to be located though)
Re: HandBrake 1.0.0 Discussion Thread
Is the QuickSync-Support limited to Windows?
Re: HandBrake 1.0.0 Discussion Thread
For the moment. I don't recall if John managed to get it working on Linux or Not but that would be the eventual goal.
- JohnAStebbins
- HandBrake Team
- Posts: 5723
- Joined: Sat Feb 09, 2008 7:21 pm
Re: HandBrake 1.0.0 Discussion Thread
HandBrake on linux uses the version of x264 from your repository. So if you want a newer version, you'll need to upgrade to a more recent version of Ubuntu.datahoarder44 wrote:Not really sure if this a bug but Handbrake 1.0.0 seems to be using the old x264 version at least according to MediaInfo:
Writing application :
HandBrake 1.0.0 2016122400It should be x264 148 r2708Writing library :
x264 core 142 r2491 24e4fed
I'm on Ubuntu 14.04 maybe I need to remove some older files like x264 and reinstall? (I don't know where they are supposed to be located though)
Re: HandBrake 1.0.0 Discussion Thread
The Version 1.0.0. is listed for use in Vista 32. But the install fails because Net 4.62 is needed and not available for Vista.
The Version 0.10.500 works like a charm...
Could you please have a look?
Thanks and kind regards
Holger
The Version 0.10.500 works like a charm...
Could you please have a look?
Thanks and kind regards
Holger
Re: HandBrake 1.0.0 Discussion Thread
HandBrake only requires .NET 4.6 not 4.6.2 so you can download that manually from Microsoft.