Intel Core i7-4650U and Intel Celeron (Bay Trail) J1800
Posted: Sun Mar 16, 2014 5:02 pm
My goal in the last few weeks was to build an entirely silent encode box, to lower the burden on my Macbook Air (the Core i7 machine). The requirements were that it could be used to rip Blu-Ray to an mkv and subtitle OCR (basically ruling out anything without Wintel), it had to be cheap, it had to be fast and it had to be fanless.
The build eventually turned into a J1800 motherboard from Gigabyte, which has an on-board J1800 bay trail processor with a TDP of only 10W. This new Atom architecture, the first to be out-of-order, is a beast and puts all old Atom models to shame. The reason to pick the J1800 though was that this is one of the few non-Core processors with support for Intel QuickSync. Combined with a small SSD, a little RAM and a mini-itx case all the goals were met.
But how does the J1800 perform? As it turns out, surprisingly well. To test the performance, I pitted the J1800 and the i7 i7-4650U against each other. the testbed consisted of Big Buck Bunny (1080p, 24fps) and Tears of Steel (1080p, 24fps, 4k master).
What we all want to know:
Big Buck Bunny (High Profile 1080p encode):
J1800, medium: 4.00 fps
J1800, QSV: 66.51 fps
i7-4650U, medium: 12.24 fps
i7-4650U, QSV: 107.50 fps
Tears of Steel (High Profile 1080p encode):
J1800, medium: 4.21 fps
J1800, QSV: 86.57 fps
i7-4650U, medium: 13.14 fps
i7-4650U, QSV: 126.35 fps
Overall, the J1800 is fast enough (and silent!) to let it sit and work if I want to obtain maximum quality.It keeps up pace with most Core2Duo models, yet at a far lower power consumption. At the same time, converting a Blu-Ray can be done at about 3x native speed using QSV, which is faster than I can rip them from the disc
. The i7 handily beats the J1800 both in software and QSV speed. Thank goodness, given that the i7-4650U processor alone costs about twice as much as the entire J1800 build!
Quality-wise, QSV on J1800 is clearly the loser as it is based on the pre-Haswell models of QSV. QSV on the Intel Core i7 and the medium software encode are virtually indistinguishable from the source in visual quality, even after pixel peeping. All encodes are virtually indistinguishable when actively watching in my home setup. Screen grabs from all encodes can be found here: https://www.dropbox.com/sh/eiklbgth2upgul6/TL3SH_memW
Finally, I also include the logs of all the Big Buck Bunny encodes. The logs for Tears of Steel use exactly the same settings.
log for Big Buck Bunny, J1800 software:
log for Big Buck Bunny, J1800 QSV:
log for Big Buck Bunny, i7-4650U software:
log for Big Buck Bunny, i7-4650U QSV:
The build eventually turned into a J1800 motherboard from Gigabyte, which has an on-board J1800 bay trail processor with a TDP of only 10W. This new Atom architecture, the first to be out-of-order, is a beast and puts all old Atom models to shame. The reason to pick the J1800 though was that this is one of the few non-Core processors with support for Intel QuickSync. Combined with a small SSD, a little RAM and a mini-itx case all the goals were met.
But how does the J1800 perform? As it turns out, surprisingly well. To test the performance, I pitted the J1800 and the i7 i7-4650U against each other. the testbed consisted of Big Buck Bunny (1080p, 24fps) and Tears of Steel (1080p, 24fps, 4k master).
What we all want to know:
Big Buck Bunny (High Profile 1080p encode):
J1800, medium: 4.00 fps
J1800, QSV: 66.51 fps
i7-4650U, medium: 12.24 fps
i7-4650U, QSV: 107.50 fps
Tears of Steel (High Profile 1080p encode):
J1800, medium: 4.21 fps
J1800, QSV: 86.57 fps
i7-4650U, medium: 13.14 fps
i7-4650U, QSV: 126.35 fps
Overall, the J1800 is fast enough (and silent!) to let it sit and work if I want to obtain maximum quality.It keeps up pace with most Core2Duo models, yet at a far lower power consumption. At the same time, converting a Blu-Ray can be done at about 3x native speed using QSV, which is faster than I can rip them from the disc
![Smile :)](./images/smilies/icon_smile.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Quality-wise, QSV on J1800 is clearly the loser as it is based on the pre-Haswell models of QSV. QSV on the Intel Core i7 and the medium software encode are virtually indistinguishable from the source in visual quality, even after pixel peeping. All encodes are virtually indistinguishable when actively watching in my home setup. Screen grabs from all encodes can be found here: https://www.dropbox.com/sh/eiklbgth2upgul6/TL3SH_memW
Finally, I also include the logs of all the Big Buck Bunny encodes. The logs for Tears of Steel use exactly the same settings.
log for Big Buck Bunny, J1800 software:
Code: Select all
HandBrake svn6113 (Nightly Build) - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz
Ram: 1943 MB,
GPU Information:
Intel(R) HD Graphics - 10.18.10.3408
Screen: 1920x1080
Temp Dir: C:\Users\Kim Bauters\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\Kim Bauters\AppData\Roaming\HandBrake\HandBrake\0.0.0.6113
-------------------------------------------
CLI Query: -i "D:\Big Buck Bunny.mov" -t 1 --angle 1 -c 1 -o "D:\converted\Big Buck Bunny - J1800.mp4" -f mp4 --decomb -w 1920 --crop 0:0:0:0 --loose-anamorphic --modulus 2 -e x264 -q 20 --vfr -a 1,1 -E av_aac,copy:ac3 -6 dpl2,none -R Auto,Auto -B 160,0 -D 0,0 --gain 0,0 --audio-fallback ac3 --markers="C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - J1800-1-chapters.csv" --h264-level="4.1" --h264-profile=high --verbose=1
[10:43:12] hb_init: starting libhb thread
HandBrake svn6113 (2014031501) - MinGW x86_64 - http://handbrake.fr
2 CPUs detected
Opening D:\Big Buck Bunny.mov...
[10:43:12] CPU: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz
[10:43:12] - Intel microarchitecture Silvermont
[10:43:12] - logical processor count: 2
[10:43:12] OpenCL device #1: Intel(R) Corporation Intel(R) HD Graphics
[10:43:12] - OpenCL version: 1.2
[10:43:12] - driver version: 10.18.10.3408
[10:43:12] - device type: GPU
[10:43:12] - supported: YES
[10:43:12] Intel Quick Sync Video support: yes
[10:43:12] - Intel Media SDK hardware: API 1.7 (minimum: 1.3)
[10:43:12] - H.264 encoder: yes
[10:43:12] - preferred implementation: hardware (any)
[10:43:12] - H.265 encoder: no
[10:43:12] hb_scan: path=D:\Big Buck Bunny.mov, title_index=1
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening D:\Big Buck Bunny.mov/BDMV/index.bdmv
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening D:\Big Buck Bunny.mov/BDMV/BACKUP/index.bdmv
libbluray/bluray.c:2182: nav_get_title_list(D:\Big Buck Bunny.mov) failed
[10:43:12] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.0
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[10:43:12] dvd: not a dvd - trying as a stream/file instead
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'D:\Big Buck Bunny.mov':
Metadata:
major_brand : qt
minor_version : 537199360
compatible_brands: qt
creation_time : 2008-05-27 18:40:35
Duration: 00:09:56.48, start: 0.000000, bitrate: 9725 kb/s
Stream #0.0(eng): Video: h264 (Main), yuv420p, 1920x1080, 9282 kb/s, 24 fps, 2400 tbn (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.1(eng): Data: tmcd / 0x64636D74 (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.2(eng): Audio: aac, 48000 Hz, 5.1, fltp, 437 kb/s (default)
Metadata:
creation_time : 2008-05-27 18:40:35
[10:43:12] scan: decoding previews for title 1
[10:43:12] scan: audio 0x2: aac, rate=48000Hz, bitrate=437605 English (AAC) (5.1 ch)
Scanning title 1 of 1, preview 2, 20.00 %
Scanning title 1 of 1, preview 4, 40.00 %
Scanning title 1 of 1, preview 7, 70.00 %
Scanning title 1 of 1, preview 9, 90.00 %[10:43:13] scan: 10 previews, 1920x1080, 24.000 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[10:43:13] libhb: scan thread found 1 valid title(s)
+ title 1:
+ stream: D:\Big Buck Bunny.mov
+ duration: 00:09:56
+ size: 1920x1080, pixel aspect: 1/1, display aspect: 1.78, 24.000 fps
+ autocrop: 0/0/0/0
+ support opencl: yes
+ support hwd: yes
+ chapters:
+ 1: cells 0->0, 0 blocks, duration 00:09:56
+ audio tracks:
+ 1, English (AAC) (5.1 ch) (iso639-2: eng)
+ subtitle tracks:
Reading chapter markers from file C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - J1800-1-chapters.csv
AC3 Passthru requested and input codec is not compatible for track 2, using AC3 encoder
[10:43:13] 1 job(s) to process
[10:43:13] starting job
[10:43:13] yadif thread started for segment 0
[10:43:13] decomb filter thread started for segment 1
[10:43:13] sync: expecting 14315 video frames
[10:43:13] decomb filter thread started for segment 0
[10:43:13] mask filter thread started for segment 0
[10:43:13] decomb check thread started for segment 1
[10:43:13] decomb check thread started for segment 0
[10:43:13] yadif thread started for segment 1
[10:43:13] work: only 1 chapter, disabling chapter markers
[10:43:13] mask filter thread started for segment 1
[10:43:13] job configuration:
[10:43:13] mask erode thread started for segment 1
[10:43:13] mask erode thread started for segment 0
[10:43:13] mask dilate thread started for segment 0
[10:43:13] * source
[10:43:13] + D:\Big Buck Bunny.mov
[10:43:13] + title 1, chapter(s) 1 to 1
[10:43:13] mask dilate thread started for segment 1
[10:43:13] + container: mov,mp4,m4a,3gp,3g2,mj2
[10:43:13] + data rate: 9725 kbps
[10:43:13] * destination
[10:43:13] + D:\converted\Big Buck Bunny - J1800.mp4
[10:43:13] + container: MPEG-4 (libavformat)
[10:43:13] * video track
[10:43:13] + decoder: h264
[10:43:13] + bitrate 9282 kbps
[10:43:13] + filters
[10:43:13] + Decomb (default settings)
[10:43:13] + Framerate Shaper (0:27000000:1125000)
[10:43:13] + frame rate: same as source (around 24.000 fps)
[10:43:13] + Crop and Scale (1920:1080:0:0:0:0)
[10:43:13] + source: 1920 * 1080, crop (0/0/0/0): 1920 * 1080, scale: 1920 * 1080
[10:43:13] + loose anamorphic
[10:43:13] + storage dimensions: 1920 * 1080, mod 2
[10:43:13] + pixel aspect ratio: 1 / 1
[10:43:13] + display dimensions: 1920 * 1080
[10:43:13] + encoder: H.264 (libx264)
[10:43:13] + H.264 profile: high
[10:43:13] + H.264 level: 4.1
[10:43:13] + quality: 20.00 (RF)
[10:43:13] * audio track 1
[10:43:13] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[10:43:13] + bitrate: 437 kbps, samplerate: 48000 Hz
[10:43:13] + mixdown: Dolby Pro Logic II
[10:43:13] + encoder: AAC (libavcodec)
[10:43:13] + bitrate: 160 kbps, samplerate: 48000 Hz
[10:43:13] * audio track 2
[10:43:13] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[10:43:13] + bitrate: 437 kbps, samplerate: 48000 Hz
[10:43:13] + mixdown: 5.1 Channels
[10:43:13] + encoder: AC3 (libavcodec)
[10:43:13] + bitrate: 640 kbps, samplerate: 48000 Hz
[10:43:13] reader: first SCR 0 id 0x2 DTS 0
[10:43:13] encx264: min-keyint: 24, keyint: 240
[10:43:13] encx264: encoding at constant RF 20.000000
[10:43:13] encx264: unparsed options: level=4.1:vbv-bufsize=78125:vbv-maxrate=62500
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
x264 [info]: profile High, level 4.1
[11:42:47] reader: done. 1 scr changes
[11:43:06] work: average encoding speed for job is 3.995594 fps
[11:43:06] sync: got 14315 frames, 14315 expected
[11:43:06] decomb: deinterlaced 420 | blended 347 | unfiltered 13547 | total 14314
[11:43:06] render: lost time: 0 (0 frames)
[11:43:06] render: gained time: 0 (0 frames) (0 not accounted for)
[11:43:06] h264-decoder done: 14315 frames, 0 decoder errors, 0 drops
x264 [info]: frame I:154 Avg QP:13.52 size:232480
x264 [info]: frame P:4928 Avg QP:18.12 size: 48263
x264 [info]: frame B:9232 Avg QP:22.60 size: 7986
x264 [info]: consecutive B-frames: 8.1% 12.9% 14.6% 64.4%
x264 [info]: mb I I16..4: 21.7% 19.1% 59.2%
x264 [info]: mb P I16..4: 4.0% 8.3% 4.5% P16..4: 27.8% 12.0% 6.7% 0.0% 0.0% skip:36.7%
x264 [info]: mb B I16..4: 0.4% 0.9% 0.4% B16..8: 23.8% 2.5% 0.5% direct: 1.6% skip:69.9% L0:44.5% L1:48.4% BI: 7.2%
x264 [info]: 8x8 transform intra:45.5% inter:58.7%
x264 [info]: coded y,uvDC,uvAC intra: 55.1% 55.0% 21.6% inter: 10.8% 12.3% 2.5%
x264 [info]: i16 v,h,dc,p: 26% 23% 15% 36%
x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 16% 26% 4% 5% 9% 5% 5% 5%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 16% 18% 5% 8% 10% 5% 5% 3%
x264 [info]: i8c dc,h,v,p: 48% 21% 19% 12%
x264 [info]: Weighted P-Frames: Y:5.4% UV:3.6%
x264 [info]: ref P L0: 68.8% 13.2% 13.2% 4.6% 0.2%
x264 [info]: ref B L0: 85.6% 13.0% 1.5%
x264 [info]: ref B L1: 94.3% 5.7%
x264 [info]: kb/s:4659.44
[11:43:06] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[11:43:06] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[11:43:06] mux: track 0, 14314 frames, 347364557 bytes, 4659.03 kbps, fifo 1024
[11:43:06] mux: track 1, 27959 frames, 11955657 bytes, 160.36 kbps, fifo 2048
[11:43:06] mux: track 2, 18640 frames, 47718400 bytes, 640.02 kbps, fifo 2048
[11:43:06] libhb: work result = 0
Encode done!
HandBrake has exited.
Code: Select all
HandBrake svn6113 (Nightly Build) - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz
Ram: 1943 MB,
GPU Information:
Intel(R) HD Graphics - 10.18.10.3408
Screen: 1920x1080
Temp Dir: C:\Users\Kim Bauters\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\Kim Bauters\AppData\Roaming\HandBrake\HandBrake\0.0.0.6113
-------------------------------------------
CLI Query: -i "D:\Big Buck Bunny.mov" -t 1 --angle 1 -c 1 -o "D:\converted\Big Buck Bunny - J1800 QSV.mp4" -f mp4 --decomb -w 1920 --crop 0:0:0:0 --loose-anamorphic --modulus 2 -e qsv_h264 -q 20 --cfr -a 1,1 -E av_aac,copy:ac3 -6 dpl2,none -R Auto,Auto -B 160,0 -D 0,0 --gain 0,0 --audio-fallback ac3 --markers="C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - J1800 QSV-1-chapters.csv" --qsv-preset=balanced --h264-level="4.1" --h264-profile=high --verbose=1
[11:43:07] hb_init: starting libhb thread
HandBrake svn6113 (2014031501) - MinGW x86_64 - http://handbrake.fr
2 CPUs detected
Opening D:\Big Buck Bunny.mov...
[11:43:07] CPU: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz
[11:43:07] - Intel microarchitecture Silvermont
[11:43:07] - logical processor count: 2
[11:43:07] OpenCL device #1: Intel(R) Corporation Intel(R) HD Graphics
[11:43:07] - OpenCL version: 1.2
[11:43:07] - driver version: 10.18.10.3408
[11:43:07] - device type: GPU
[11:43:07] - supported: YES
[11:43:07] Intel Quick Sync Video support: yes
[11:43:07] - Intel Media SDK hardware: API 1.7 (minimum: 1.3)
[11:43:07] - H.264 encoder: yes
[11:43:07] - preferred implementation: hardware (any)
[11:43:07] - H.265 encoder: no
[11:43:07] hb_scan: path=D:\Big Buck Bunny.mov, title_index=1
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening D:\Big Buck Bunny.mov/BDMV/index.bdmv
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening D:\Big Buck Bunny.mov/BDMV/BACKUP/index.bdmv
libbluray/bluray.c:2182: nav_get_title_list(D:\Big Buck Bunny.mov) failed
[11:43:07] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.0
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[11:43:07] dvd: not a dvd - trying as a stream/file instead
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'D:\Big Buck Bunny.mov':
Metadata:
major_brand : qt
minor_version : 537199360
compatible_brands: qt
creation_time : 2008-05-27 18:40:35
Duration: 00:09:56.48, start: 0.000000, bitrate: 9725 kb/s
Stream #0.0(eng): Video: h264 (Main), yuv420p, 1920x1080, 9282 kb/s, 24 fps, 2400 tbn (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.1(eng): Data: tmcd / 0x64636D74 (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.2(eng): Audio: aac, 48000 Hz, 5.1, fltp, 437 kb/s (default)
Metadata:
creation_time : 2008-05-27 18:40:35
[11:43:07] scan: decoding previews for title 1
[11:43:07] scan: audio 0x2: aac, rate=48000Hz, bitrate=437605 English (AAC) (5.1 ch)
Scanning title 1 of 1, preview 1, 10.00 %
Scanning title 1 of 1, preview 4, 40.00 %
Scanning title 1 of 1, preview 6, 60.00 %
Scanning title 1 of 1, preview 8, 80.00 %
Scanning title 1 of 1, preview 10, 100.00 %[11:43:08] scan: 10 previews, 1920x1080, 24.000 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[11:43:08] libhb: scan thread found 1 valid title(s)
+ title 1:
+ stream: D:\Big Buck Bunny.mov
+ duration: 00:09:56
+ size: 1920x1080, pixel aspect: 1/1, display aspect: 1.78, 24.000 fps
+ autocrop: 0/0/0/0
+ support opencl: yes
+ support hwd: yes
+ chapters:
+ 1: cells 0->0, 0 blocks, duration 00:09:56
+ audio tracks:
+ 1, English (AAC) (5.1 ch) (iso639-2: eng)
+ subtitle tracks:
Reading chapter markers from file C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - J1800 QSV-1-chapters.csv
AC3 Passthru requested and input codec is not compatible for track 2, using AC3 encoder
[11:43:08] 1 job(s) to process
[11:43:08] starting job
[11:43:08] do_job: QSV: full path, removing unsupported filter 'Decomb'
[11:43:08] do_job: QSV: full path, removing unsupported filter 'Framerate Shaper'
[11:43:08] sync: expecting 14315 video frames
[11:43:08] work: only 1 chapter, disabling chapter markers
[11:43:08] job configuration:
[11:43:08] * source
[11:43:08] + D:\Big Buck Bunny.mov
[11:43:08] + title 1, chapter(s) 1 to 1
[11:43:08] + container: mov,mp4,m4a,3gp,3g2,mj2
[11:43:08] + data rate: 9725 kbps
[11:43:08] * destination
[11:43:08] + D:\converted\Big Buck Bunny - J1800 QSV.mp4
[11:43:08] + container: MPEG-4 (libavformat)
[11:43:08] * video track
[11:43:08] + decoder: h264_qsv
[11:43:08] + bitrate 9282 kbps
[11:43:08] + loose anamorphic
[11:43:08] + storage dimensions: 1920 * 1080, mod 2
[11:43:08] + pixel aspect ratio: 1 / 1
[11:43:08] + display dimensions: 1920 * 1080
[11:43:08] + encoder: H.264 (Intel Media SDK)
[11:43:08] + QSV preset: balanced
[11:43:08] + H.264 profile: high
[11:43:08] + H.264 level: 4.1
[11:43:08] + quality: 20.00 (QP)
[11:43:08] * audio track 1
[11:43:08] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[11:43:08] + bitrate: 437 kbps, samplerate: 48000 Hz
[11:43:08] + mixdown: Dolby Pro Logic II
[11:43:08] + encoder: AAC (libavcodec)
[11:43:08] + bitrate: 160 kbps, samplerate: 48000 Hz
[11:43:08] * audio track 2
[11:43:08] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[11:43:08] + bitrate: 437 kbps, samplerate: 48000 Hz
[11:43:08] + mixdown: 5.1 Channels
[11:43:08] + encoder: AC3 (libavcodec)
[11:43:08] + bitrate: 640 kbps, samplerate: 48000 Hz
[11:43:08] reader: first SCR 0 id 0x2 DTS 0
[11:43:08] encqsvInit: using full QSV path
[11:43:08] encqsvInit: TargetUsage 2 AsyncDepth 4
[11:43:08] encqsvInit: GopRefDist 4 GopPicSize 32 NumRefFrame 2
[11:43:08] encqsvInit: BFrames on
[11:43:08] encqsvInit: RateControlMethod CQP with QPI 20 QPP 22 QPB 24
[11:43:08] encqsvInit: CAVLC off
[11:43:08] encqsvInit: H.264 profile High @ level 4.1
[11:43:09] qsv_enc_init: using 'hardware (1)' implementation, API: 1.7
[11:46:43] reader: done. 1 scr changes
[11:46:44] work: average encoding speed for job is 66.510109 fps
[11:46:44] sync: got 14315 frames, 14315 expected
[11:46:44] h264_qsv-decoder done: 14315 frames, 0 decoder errors, 0 drops
[11:46:44] enc_qsv done: frames: 14315 in, 14315 out
[11:46:44] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[11:46:44] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[11:46:44] mux: track 0, 14315 frames, 408463282 bytes, 5478.52 kbps, fifo 1024
[11:46:44] mux: track 1, 27959 frames, 11955657 bytes, 160.36 kbps, fifo 2048
[11:46:44] mux: track 2, 18640 frames, 47718400 bytes, 640.02 kbps, fifo 1024
[11:46:44] libhb: work result = 0
Encode done!
HandBrake has exited.
Code: Select all
HandBrake svn6113 (Nightly Build) - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz
Ram: 8132 MB,
GPU Information:
Intel(R) HD Graphics 5000 - 10.18.10.3379
Screen: 1440x900
Temp Dir: C:\Users\Kim Bauters\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\Kim Bauters\AppData\Roaming\HandBrake\HandBrake\0.0.0.6113
-------------------------------------------
CLI Query: -i "E:\Big Buck Bunny.mov" -t 1 --angle 1 -c 1 -o "E:\converted\Big Buck Bunny - Macbook Air.mp4" -f mp4 --decomb -w 1920 --crop 0:0:0:0 --loose-anamorphic --modulus 2 -e x264 -q 20 --vfr -a 1,1 -E av_aac,copy:ac3 -6 dpl2,none -R Auto,Auto -B 160,0 -D 0,0 --gain 0,0 --audio-fallback ac3 --markers="C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - Macbook Air-1-chapters.csv" --h264-level="4.1" --h264-profile=high --verbose=1 -P
[09:47:36] hb_init: starting libhb thread
HandBrake svn6113 (2014031501) - MinGW x86_64 - http://handbrake.fr
4 CPUs detected
Opening E:\Big Buck Bunny.mov...
[09:47:36] CPU: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz
[09:47:36] - Intel microarchitecture Haswell
[09:47:36] - logical processor count: 4
[09:47:36] OpenCL device #1: Intel(R) Corporation Intel(R) HD Graphics 5000
[09:47:36] - OpenCL version: 1.2
[09:47:36] - driver version: 10.18.10.3379
[09:47:36] - device type: GPU
[09:47:36] - supported: YES
[09:47:36] Intel Quick Sync Video support: yes
[09:47:36] - Intel Media SDK hardware: API 1.7 (minimum: 1.3)
[09:47:36] - H.264 encoder: yes
[09:47:36] - preferred implementation: hardware (any)
[09:47:36] - H.265 encoder: no
[09:47:36] hb_scan: path=E:\Big Buck Bunny.mov, title_index=1
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening E:\Big Buck Bunny.mov/BDMV/index.bdmv
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening E:\Big Buck Bunny.mov/BDMV/BACKUP/index.bdmv
libbluray/bluray.c:2182: nav_get_title_list(E:\Big Buck Bunny.mov) failed
[09:47:36] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.0
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[09:47:36] dvd: not a dvd - trying as a stream/file instead
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'E:\Big Buck Bunny.mov':
Metadata:
major_brand : qt
minor_version : 537199360
compatible_brands: qt
creation_time : 2008-05-27 18:40:35
Duration: 00:09:56.48, start: 0.000000, bitrate: 9725 kb/s
Stream #0.0(eng): Video: h264 (Main), yuv420p, 1920x1080, 9282 kb/s, 24 fps, 2400 tbn (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.1(eng): Data: tmcd / 0x64636D74 (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.2(eng): Audio: aac, 48000 Hz, 5.1, fltp, 437 kb/s (default)
Metadata:
creation_time : 2008-05-27 18:40:35
[09:47:36] scan: decoding previews for title 1
[09:47:36] scan: audio 0x2: aac, rate=48000Hz, bitrate=437605 English (AAC) (5.1 ch)
Scanning title 1 of 1, preview 2, 20.00 %
Scanning title 1 of 1, preview 5, 50.00 %
Scanning title 1 of 1, preview 6, 60.00 %
Scanning title 1 of 1, preview 8, 80.00 %
Scanning title 1 of 1, preview 9, 90.00 %[09:47:37] scan: 10 previews, 1920x1080, 24.000 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[09:47:37] libhb: scan thread found 1 valid title(s)
+ title 1:
+ stream: E:\Big Buck Bunny.mov
+ duration: 00:09:56
+ size: 1920x1080, pixel aspect: 1/1, display aspect: 1.78, 24.000 fps
+ autocrop: 0/0/0/0
+ support opencl: yes
+ support hwd: yes
+ chapters:
+ 1: cells 0->0, 0 blocks, duration 00:09:56
+ audio tracks:
+ 1, English (AAC) (5.1 ch) (iso639-2: eng)
+ subtitle tracks:
Reading chapter markers from file C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - Macbook Air-1-chapters.csv
AC3 Passthru requested and input codec is not compatible for track 2, using AC3 encoder
[09:47:37] 1 job(s) to process
[09:47:38] starting job
[09:47:38] yadif thread started for segment 0
[09:47:38] yadif thread started for segment 1
[09:47:38] decomb filter thread started for segment 1
[09:47:38] yadif thread started for segment 3
[09:47:38] decomb filter thread started for segment 0
[09:47:38] yadif thread started for segment 2
[09:47:38] decomb filter thread started for segment 2
[09:47:38] decomb filter thread started for segment 3
[09:47:38] decomb check thread started for segment 0
[09:47:38] decomb check thread started for segment 1
[09:47:38] decomb check thread started for segment 3
[09:47:38] decomb check thread started for segment 2
[09:47:38] mask filter thread started for segment 0
[09:47:38] mask filter thread started for segment 1
[09:47:38] mask filter thread started for segment 2
[09:47:38] mask filter thread started for segment 3
[09:47:38] mask erode thread started for segment 0
[09:47:38] mask erode thread started for segment 1
[09:47:38] mask erode thread started for segment 2
[09:47:38] mask erode thread started for segment 3
[09:47:38] mask dilate thread started for segment 0
[09:47:38] mask dilate thread started for segment 1
[09:47:38] mask dilate thread started for segment 2
[09:47:38] mask dilate thread started for segment 3
[09:47:38] sync: expecting 14315 video frames
[09:47:38] work: only 1 chapter, disabling chapter markers
[09:47:38] job configuration:
[09:47:38] * source
[09:47:38] + E:\Big Buck Bunny.mov
[09:47:38] + title 1, chapter(s) 1 to 1
[09:47:38] + container: mov,mp4,m4a,3gp,3g2,mj2
[09:47:38] + data rate: 9725 kbps
[09:47:38] * destination
[09:47:38] + E:\converted\Big Buck Bunny - Macbook Air.mp4
[09:47:38] + container: MPEG-4 (libavformat)
[09:47:38] * video track
[09:47:38] + decoder: h264
[09:47:38] + bitrate 9282 kbps
[09:47:38] + filters
[09:47:38] + Decomb (default settings)
[09:47:38] + Framerate Shaper (0:27000000:1125000)
[09:47:38] + frame rate: same as source (around 24.000 fps)
[09:47:38] + Crop and Scale (1920:1080:0:0:0:0)
[09:47:38] + source: 1920 * 1080, crop (0/0/0/0): 1920 * 1080, scale: 1920 * 1080
[09:47:38] + loose anamorphic
[09:47:38] + storage dimensions: 1920 * 1080, mod 2
[09:47:38] + pixel aspect ratio: 1 / 1
[09:47:38] + display dimensions: 1920 * 1080
[09:47:38] + encoder: H.264 (libx264)
[09:47:38] + H.264 profile: high
[09:47:38] + H.264 level: 4.1
[09:47:38] + quality: 20.00 (RF)
[09:47:38] * audio track 1
[09:47:38] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[09:47:38] + bitrate: 437 kbps, samplerate: 48000 Hz
[09:47:38] + mixdown: Dolby Pro Logic II
[09:47:38] + encoder: AAC (libavcodec)
[09:47:38] + bitrate: 160 kbps, samplerate: 48000 Hz
[09:47:38] * audio track 2
[09:47:38] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[09:47:38] + bitrate: 437 kbps, samplerate: 48000 Hz
[09:47:38] + mixdown: 5.1 Channels
[09:47:38] + encoder: AC3 (libavcodec)
[09:47:38] + bitrate: 640 kbps, samplerate: 48000 Hz
[09:47:38] reader: first SCR 0 id 0x2 DTS 0
[09:47:38] encx264: min-keyint: 24, keyint: 240
[09:47:38] encx264: encoding at constant RF 20.000000
[09:47:38] encx264: unparsed options: level=4.1:vbv-bufsize=78125:vbv-maxrate=62500
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX AVX2 FMA3 LZCNT BMI2
x264 [info]: profile High, level 4.1
[10:07:04] reader: done. 1 scr changes
[10:07:10] work: average encoding speed for job is 12.238238 fps
[10:07:10] sync: got 14315 frames, 14315 expected
[10:07:10] decomb: deinterlaced 420 | blended 347 | unfiltered 13547 | total 14314
[10:07:10] render: lost time: 0 (0 frames)
[10:07:10] render: gained time: 0 (0 frames) (0 not accounted for)
[10:07:10] h264-decoder done: 14315 frames, 0 decoder errors, 0 drops
x264 [info]: frame I:154 Avg QP:13.52 size:232480
x264 [info]: frame P:4928 Avg QP:18.12 size: 48263
x264 [info]: frame B:9232 Avg QP:22.60 size: 7988
x264 [info]: consecutive B-frames: 8.1% 12.9% 14.6% 64.4%
x264 [info]: mb I I16..4: 21.7% 19.1% 59.2%
x264 [info]: mb P I16..4: 4.0% 8.3% 4.5% P16..4: 27.8% 12.0% 6.7% 0.0% 0.0% skip:36.7%
x264 [info]: mb B I16..4: 0.4% 0.9% 0.4% B16..8: 23.8% 2.5% 0.5% direct: 1.6% skip:69.9% L0:44.5% L1:48.4% BI: 7.1%
x264 [info]: 8x8 transform intra:45.5% inter:58.7%
x264 [info]: coded y,uvDC,uvAC intra: 55.1% 55.1% 21.7% inter: 10.8% 12.3% 2.4%
x264 [info]: i16 v,h,dc,p: 26% 23% 14% 36%
x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 16% 26% 4% 5% 9% 5% 5% 5%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 16% 18% 5% 8% 10% 5% 5% 3%
x264 [info]: i8c dc,h,v,p: 48% 21% 19% 12%
x264 [info]: Weighted P-Frames: Y:5.4% UV:3.6%
x264 [info]: ref P L0: 68.8% 13.2% 13.2% 4.6% 0.2%
x264 [info]: ref B L0: 85.5% 13.0% 1.5%
x264 [info]: ref B L1: 94.3% 5.7%
x264 [info]: kb/s:4659.64
[10:07:11] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[10:07:11] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[10:07:11] mux: track 0, 14314 frames, 347379996 bytes, 4659.24 kbps, fifo 1024
[10:07:11] mux: track 1, 27959 frames, 11955657 bytes, 160.36 kbps, fifo 2048
[10:07:11] mux: track 2, 18640 frames, 47718400 bytes, 640.02 kbps, fifo 2048
[10:07:11] libhb: work result = 0
Encode done!
HandBrake has exited.
Code: Select all
HandBrake svn6113 (Nightly Build) - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz
Ram: 8132 MB,
GPU Information:
Intel(R) HD Graphics 5000 - 10.18.10.3379
Screen: 1440x900
Temp Dir: C:\Users\Kim Bauters\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\Kim Bauters\AppData\Roaming\HandBrake\HandBrake\0.0.0.6113
-------------------------------------------
CLI Query: -i "E:\Big Buck Bunny.mov" -t 1 --angle 1 -c 1 -o "E:\converted\Big Buck Bunny - Macbook Air QSV.mp4" -f mp4 --decomb -w 1920 --crop 0:0:0:0 --loose-anamorphic --modulus 2 -e qsv_h264 -q 20 --cfr -a 1,1 -E av_aac,copy:ac3 -6 dpl2,none -R Auto,Auto -B 160,0 -D 0,0 --gain 0,0 --audio-fallback ac3 --markers="C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - Macbook Air QSV-1-chapters.csv" --qsv-preset=quality --h264-level="4.1" --h264-profile=high --verbose=1
[10:08:22] hb_init: starting libhb thread
HandBrake svn6113 (2014031501) - MinGW x86_64 - http://handbrake.fr
4 CPUs detected
Opening E:\Big Buck Bunny.mov...
[10:08:22] CPU: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz
[10:08:22] - Intel microarchitecture Haswell
[10:08:22] - logical processor count: 4
[10:08:22] OpenCL device #1: Intel(R) Corporation Intel(R) HD Graphics 5000
[10:08:22] - OpenCL version: 1.2
[10:08:22] - driver version: 10.18.10.3379
[10:08:22] - device type: GPU
[10:08:22] - supported: YES
[10:08:22] Intel Quick Sync Video support: yes
[10:08:22] - Intel Media SDK hardware: API 1.7 (minimum: 1.3)
[10:08:22] - H.264 encoder: yes
[10:08:22] - preferred implementation: hardware (any)
[10:08:22] - H.265 encoder: no
[10:08:22] hb_scan: path=E:\Big Buck Bunny.mov, title_index=1
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening E:\Big Buck Bunny.mov/BDMV/index.bdmv
libbluray/bdnav/index_parse.c:162: indx_parse(): error opening E:\Big Buck Bunny.mov/BDMV/BACKUP/index.bdmv
libbluray/bluray.c:2182: nav_get_title_list(E:\Big Buck Bunny.mov) failed
[10:08:22] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.0
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[10:08:22] dvd: not a dvd - trying as a stream/file instead
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'E:\Big Buck Bunny.mov':
Metadata:
major_brand : qt
minor_version : 537199360
compatible_brands: qt
creation_time : 2008-05-27 18:40:35
Duration: 00:09:56.48, start: 0.000000, bitrate: 9725 kb/s
Stream #0.0(eng): Video: h264 (Main), yuv420p, 1920x1080, 9282 kb/s, 24 fps, 2400 tbn (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.1(eng): Data: tmcd / 0x64636D74 (default)
Metadata:
creation_time : 2008-05-27 18:40:35
Stream #0.2(eng): Audio: aac, 48000 Hz, 5.1, fltp, 437 kb/s (default)
Metadata:
creation_time : 2008-05-27 18:40:35
[10:08:23] scan: decoding previews for title 1
[10:08:23] scan: audio 0x2: aac, rate=48000Hz, bitrate=437605 English (AAC) (5.1 ch)
Scanning title 1 of 1, preview 2, 20.00 %
Scanning title 1 of 1, preview 5, 50.00 %
Scanning title 1 of 1, preview 6, 60.00 %
Scanning title 1 of 1, preview 8, 80.00 %
Scanning title 1 of 1, preview 9, 90.00 %[10:08:24] scan: 10 previews, 1920x1080, 24.000 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[10:08:24] libhb: scan thread found 1 valid title(s)
+ title 1:
+ stream: E:\Big Buck Bunny.mov
+ duration: 00:09:56
+ size: 1920x1080, pixel aspect: 1/1, display aspect: 1.78, 24.000 fps
+ autocrop: 0/0/0/0
+ support opencl: yes
+ support hwd: yes
+ chapters:
+ 1: cells 0->0, 0 blocks, duration 00:09:56
+ audio tracks:
+ 1, English (AAC) (5.1 ch) (iso639-2: eng)
+ subtitle tracks:
Reading chapter markers from file C:\Users\Kim Bauters\AppData\Local\Temp\Big Buck Bunny - Macbook Air QSV-1-chapters.csv
AC3 Passthru requested and input codec is not compatible for track 2, using AC3 encoder
[10:08:24] 1 job(s) to process
[10:08:24] starting job
[10:08:24] do_job: QSV: full path, removing unsupported filter 'Decomb'
[10:08:24] do_job: QSV: full path, removing unsupported filter 'Framerate Shaper'
[10:08:24] sync: expecting 14315 video frames
[10:08:24] work: only 1 chapter, disabling chapter markers
[10:08:24] job configuration:
[10:08:24] * source
[10:08:24] + E:\Big Buck Bunny.mov
[10:08:24] + title 1, chapter(s) 1 to 1
[10:08:24] + container: mov,mp4,m4a,3gp,3g2,mj2
[10:08:24] + data rate: 9725 kbps
[10:08:24] * destination
[10:08:24] + E:\converted\Big Buck Bunny - Macbook Air QSV.mp4
[10:08:24] + container: MPEG-4 (libavformat)
[10:08:24] * video track
[10:08:24] + decoder: h264_qsv
[10:08:24] + bitrate 9282 kbps
[10:08:24] + loose anamorphic
[10:08:24] + storage dimensions: 1920 * 1080, mod 2
[10:08:24] + pixel aspect ratio: 1 / 1
[10:08:24] + display dimensions: 1920 * 1080
[10:08:24] + encoder: H.264 (Intel Media SDK)
[10:08:24] + QSV preset: quality
[10:08:24] + H.264 profile: high
[10:08:24] + H.264 level: 4.1
[10:08:24] + quality: 20.00 (QP)
[10:08:24] * audio track 1
[10:08:24] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[10:08:24] + bitrate: 437 kbps, samplerate: 48000 Hz
[10:08:24] + mixdown: Dolby Pro Logic II
[10:08:24] + encoder: AAC (libavcodec)
[10:08:24] + bitrate: 160 kbps, samplerate: 48000 Hz
[10:08:24] * audio track 2
[10:08:24] + decoder: English (AAC) (5.1 ch) (track 1, id 0x2)
[10:08:24] + bitrate: 437 kbps, samplerate: 48000 Hz
[10:08:24] + mixdown: 5.1 Channels
[10:08:24] + encoder: AC3 (libavcodec)
[10:08:24] + bitrate: 640 kbps, samplerate: 48000 Hz
[10:08:24] reader: first SCR 0 id 0x2 DTS 0
[10:08:26] encqsvInit: using full QSV path
[10:08:26] encqsvInit: TargetUsage 2 AsyncDepth 4
[10:08:26] encqsvInit: GopRefDist 4 GopPicSize 32 NumRefFrame 3
[10:08:26] encqsvInit: BFrames on BPyramid on
[10:08:26] encqsvInit: RateControlMethod CQP with QPI 20 QPP 22 QPB 24
[10:08:26] encqsvInit: CAVLC off
[10:08:26] encqsvInit: Trellis off
[10:08:26] encqsvInit: H.264 profile High @ level 4.1
[10:08:26] qsv_enc_init: using 'hardware (1)' implementation, API: 1.7
[10:10:39] reader: done. 1 scr changes
[10:10:39] work: average encoding speed for job is 107.499191 fps
[10:10:39] sync: got 14315 frames, 14315 expected
[10:10:39] h264_qsv-decoder done: 14315 frames, 0 decoder errors, 0 drops
[10:10:39] enc_qsv done: frames: 14315 in, 14315 out
[10:10:39] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[10:10:39] aac-decoder done: 0 frames, 0 decoder errors, 0 drops
[10:10:40] mux: track 0, 14315 frames, 405450815 bytes, 5438.11 kbps, fifo 1024
[10:10:40] mux: track 1, 27959 frames, 11955657 bytes, 160.36 kbps, fifo 2048
[10:10:40] mux: track 2, 18640 frames, 47718400 bytes, 640.02 kbps, fifo 1024
[10:10:40] libhb: work result = 0
Encode done!
HandBrake has exited.