How can I change from a 4:3 to 16.9 output frame?
Forum rules
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
How can I change from a 4:3 to 16.9 output frame?
Hi,
I am trying take a video and convert it to 16:9 because it is squashed in 4.3. How can I do that?
https://expirebox.com/download/6acd4bb9 ... e04e2.html
MBP: 10.11.6
HB: 1.0.7
I am trying take a video and convert it to 16:9 because it is squashed in 4.3. How can I do that?
https://expirebox.com/download/6acd4bb9 ... e04e2.html
MBP: 10.11.6
HB: 1.0.7
Re: How can I change from a 4:3 to 16.9 output frame?
You did not include the full log, so we don't see how Handbrake saw the file, or what settings you used. And it looks like the source is encrypted, and you have nothing installed to decrypt it; but, without the first part of the log, it's hard to tell.
Re: How can I change from a 4:3 to 16.9 output frame?
Thats all the activity log gave me.
Re: How can I change from a 4:3 to 16.9 output frame?
If you were copying from the Activity Window, you need to pull the full log. That is stored on your drive as a separate file for each encode.
The red-on-pink box above has a link to tell you where these log files are stored.
The red-on-pink box above has a link to tell you where these log files are stored.
Re: How can I change from a 4:3 to 16.9 output frame?
Ok I did that...See if this will help:
https://expirebox.com/download/749598e7 ... f484c.html
I basically just want to know if there is a setting I can do to give me the 16;9 frame.
https://expirebox.com/download/749598e7 ... f484c.html
I basically just want to know if there is a setting I can do to give me the 16;9 frame.
Re: How can I change from a 4:3 to 16.9 output frame?
OK, the DVD itself is reporting 4:3 aspect ratio, which is normal; the video is stored as 4:3. I see nothing in the configuration that says it should be displayed as 16:9 or any other aspect ratio, for that matter:
But, then again, I'm just guessing at that - I'm certainly not an anamorphic expert!
Since the source does not appear to have anamorphic values to make it 16:9, I think stretching this horizontally would require a custom anamorphic setting, which, unfortunately, you can't do within the Windows GUI.[09:52:21] * source
[09:52:21] + /dev/disk6
[09:52:21] + title 1, chapter(s) 1 to 4
[09:52:21] * destination
[09:52:21] + /Volumes/Other Stuff/Tomas Ramos Video Project/10_Egypt.mp4
[09:52:21] + container: MPEG-4 (libavformat)
[09:52:21] + chapter markers
[09:52:21] * video track
[09:52:21] + decoder: mpeg2video
[09:52:21] + bitrate 9558 kbps
[09:52:21] + filters
[09:52:21] + Comb Detect (mode=3:spatial-metric=2:motion-thresh=1:spatial-thresh=1:filter-mode=2:block-thresh=40:block-width=16:block-height=16)
[09:52:21] + Decomb (mode=39)
[09:52:21] + Framerate Shaper (mode=0:rate=27000000/900900)
[09:52:21] + frame rate: same as source (around 29.970 fps)
[09:52:21] + Crop and Scale (width=688:height=470:crop-top=6:crop-bottom=4:crop-left=6:crop-right=10)
[09:52:21] + source: 704 * 480, crop (6/4/6/10): 688 * 470, scale: 688 * 470
[09:52:21] + Output geometry
[09:52:21] + storage dimensions: 688 x 470
[09:52:21] + pixel aspect ratio: 853 : 720
[09:52:21] + display dimensions: 815 x 470
[09:52:21] + encoder: H.264 (libx264)
[09:52:21] + preset: veryfast
[09:52:21] + profile: main
[09:52:21] + level: 4.0
[09:52:21] + quality: 19.00 (RF)
[09:52:21] * audio track 1
[09:52:21] + decoder: Unknown (AC3) (2.0 ch) (track 1, id 0x80bd)
[09:52:21] + bitrate: 256 kbps, samplerate: 48000 Hz
[09:52:21] + mixdown: Stereo
[09:52:21] + encoder: AAC (Apple AudioToolbox)
[09:52:21] + bitrate: 160 kbps, samplerate: 48000 Hz
But, then again, I'm just guessing at that - I'm certainly not an anamorphic expert!
Re: How can I change from a 4:3 to 16.9 output frame?
OK thank you for taking the time to evaluate that!
Re: How can I change from a 4:3 to 16.9 output frame?
Hmmm.... I forgot that you're not on Windows. The Mac GUI should have custom anamorphic, but I don't know how to make that work.
Maybe Ritsuka can give you the proper information for that.
Maybe Ritsuka can give you the proper information for that.
Re: How can I change from a 4:3 to 16.9 output frame?
Set the Anamorphic option to Custom, uncheck Keep aspect ration, and then either set the display size, or the PAR you want.
Re: How can I change from a 4:3 to 16.9 output frame?
Fantastic, your answer just solved the very problem I came to this forum for. I've been using handbrake for a long time to convert Tivo files into iTunes friendly video's using the "High Profile" setting, however recently handbrake has been defaulting "some" of the Tivo files to display size 1440 x 1080 for some reason despite the native files being 1920 x 1080 (verified). I think this started after upgrading to 1.0.7 as nothing else has changed with mu setup? Is this a bug I should submit?
Re: How can I change from a 4:3 to 16.9 output frame?
Tivo or the upstream broadcast probably set the aspect ratio flag incorrectly. Thankfully, HandBrake lets you overcome that sort of issue, as you've recently discovered.
-
- Posts: 2
- Joined: Thu Jan 28, 2021 7:51 pm
Re: How can I change from a 4:3 to 16.9 output frame?
HB has many problems. the message boards are full of them. Now when I import a 19.9 it changes to a 4.3 on its own. Yesterday I spent 4 hours trying to solve a BLACK preview problem after conversion. JUST TOO MANY BUGS for such a little program
Re: How can I change from a 4:3 to 16.9 output frame?
kbyeeeeeeeeee