READ ME / POST HERE if a specific DVD/Movie won't rip
Forum rules
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
-
- Posts: 4
- Joined: Sun Dec 09, 2007 12:43 pm
Don't laugh. I just successfully ripped Pirates 3: AWE using just HB. Since all I wanted was an iPod version, this was a useable solution, since no one on the MtR forum has as yet successfully ripped it without having zero cell problems. Dead Man's Chest apparently caused similar problems, but since (once again) I only needed the iPod copy, not a full-disc copy, just plain old HB was good enough. For those of us just making copies for our iPods and iPhones, we may not actually need the other rippers. Just be prepared for ridiculously long rip times if you're going to use the iPod hi settings (as always). But ripping to an iPod "blessed" copy seems to get rid of a lot of problems.dynaflash wrote:Hilarious, everyone else is using a bunch of advanced rippers, , rattling chicken bones, standing on one leg .... and this guy decides to just rip it right from disk with HB... Priceless!
edit: wimp system: 1.6 mhz powermac G5 iMac, 1.25G memory, 10.3.9. 5th gen (video) iPod. HB 0.7.1a2 (yes, it's ancient, I don't rip DVDs that often anymore, system's too slow)
Re: Toy Story also won't rip (original disc)
I've ripped toy story (the original disc) just fine.surferboi wrote:Toy Story also won't rip (original disc)
The Hire (collection of BMW short films)
I tried ripping "The Hire" using the Handbrake but the source list doesn't show any of the DVD menu items except four garbage clips. Has anyone else tried ripping this DVD?
BTW, if you haven't seen them they are great short films.
BTW, if you haven't seen them they are great short films.
That doesn't surprise me. I rip nearly everything directly from the DVD and have very few problems.Scotchfairy wrote:Don't laugh. I just successfully ripped Pirates 3: AWE using just HB. Since all I wanted was an iPod version, this was a useable solution, since no one on the MtR forum has as yet successfully ripped it without having zero cell problems. Dead Man's Chest apparently caused similar problems, but since (once again) I only needed the iPod copy, not a full-disc copy, just plain old HB was good enough. For those of us just making copies for our iPods and iPhones, we may not actually need the other rippers. Just be prepared for ridiculously long rip times if you're going to use the iPod hi settings (as always). But ripping to an iPod "blessed" copy seems to get rid of a lot of problems.dynaflash wrote:Hilarious, everyone else is using a bunch of advanced rippers, , rattling chicken bones, standing on one leg .... and this guy decides to just rip it right from disk with HB... Priceless!
edit: wimp system: 1.6 mhz powermac G5 iMac, 1.25G memory, 10.3.9. 5th gen (video) iPod. HB 0.7.1a2 (yes, it's ancient, I don't rip DVDs that often anymore, system's too slow)
-
- Posts: 1
- Joined: Tue Dec 11, 2007 7:26 pm
How about Monty Python?
I've been trying to rip Monty Python's Flying Circus DVD's and only one episode on each disc will show up. Actually a file for each episode is created but only one will have any content. New to the forums but A big fan of HandBrake
-
- Moderator
- Posts: 1804
- Joined: Mon Mar 26, 2007 12:07 am
Re: How about Monty Python?
http://handbrake.m0k.org/forum/viewtopic.php?t=2741silvaniart wrote:I've been trying to rip Monty Python's Flying Circus DVD's and only one episode on each disc will show up. Actually a file for each episode is created but only one will have any content. New to the forums but A big fan of HandBrake
-
- Posts: 14
- Joined: Fri Feb 23, 2007 3:52 pm
Tomb Raider
Hello,
At the beginning of the summer I ripped the Tomb Raider movie, and it wasn't until yesterday and today that I actually sat and watched it on my touch.
However the last "chapter" of the movie just stopped - as if it were the end of the file.
So I checked all the setting I used with MTR and HB and re-encoded it this morning. The file should last approx 1h35min, but only does 1h.24.
So I just selected the chapter (12) to the last chapter (12) to see if it can encode on its own. Its does about five seconds and then stops... exactly where the movie stops if the whole film version was done.
Any idea what's causing this and how it can be fixed?
Thanks
At the beginning of the summer I ripped the Tomb Raider movie, and it wasn't until yesterday and today that I actually sat and watched it on my touch.
However the last "chapter" of the movie just stopped - as if it were the end of the file.
So I checked all the setting I used with MTR and HB and re-encoded it this morning. The file should last approx 1h35min, but only does 1h.24.
So I just selected the chapter (12) to the last chapter (12) to see if it can encode on its own. Its does about five seconds and then stops... exactly where the movie stops if the whole film version was done.
Any idea what's causing this and how it can be fixed?
Thanks
This sounds like an issue that was identified and fixed with a recent patch that will hopefully make it into .9.2 when it is released. I would try this movie if I had it, but hopefully Cav or one of the other devs who is familiar with this issue also has a copy and can confirm that it is fixed.Hello,
At the beginning of the summer I ripped the Tomb Raider movie, and it wasn't until yesterday and today that I actually sat and watched it on my touch.
However the last "chapter" of the movie just stopped - as if it were the end of the file.
So I checked all the setting I used with MTR and HB and re-encoded it this morning. The file should last approx 1h35min, but only does 1h.24.
So I just selected the chapter (12) to the last chapter (12) to see if it can encode on its own. Its does about five seconds and then stops... exactly where the movie stops if the whole film version was done.
Any idea what's causing this and how it can be fixed?
Thanks
(The original disc where this problem was identified was LotR: FOTR EE, as well as 'The Score' and perhaps others.)
-
- Moderator
- Posts: 1804
- Joined: Mon Mar 26, 2007 12:07 am
-
- Posts: 2
- Joined: Tue Jul 31, 2007 7:08 pm
Similar Problem
I am having a similar problem with Bones Season 1 Disc 3 Episode 3: Two Bodies In The Lab. It will only rip part of the epi and then says that it is complete. The Error it is giving me follows:
GUI ERROR dialog: reader: DVDReadBlocks failed (163296).
I have read through the forum and I do not know if I should add this to the list, or if this is a separate problem. I also tried it on MTR and it told me that there were bad sectors and sure enough it did not play. Any help would be great! Thanks!
GUI ERROR dialog: reader: DVDReadBlocks failed (163296).
I have read through the forum and I do not know if I should add this to the list, or if this is a separate problem. I also tried it on MTR and it told me that there were bad sectors and sure enough it did not play. Any help would be great! Thanks!
Re: Similar Problem
A forum search immediately turned up at least two potential solutions to your problem (assuming the disc is undamaged):compudude27 wrote:GUI ERROR dialog: reader: DVDReadBlocks failed (163296).
I have read through the forum and I do not know if I should add this to the list, or if this is a separate problem.
http://handbrake.m0k.org/forum/viewtopi ... readblocks
Rodney
Ohhh so that's why my Monster House wasn't working!
I was getting really frustrated with it. But now I'm annoyed that I can't get in onto my ipod.
Oh, and my Blades of Glory region 2 worked. So I don't know if it depends on the region of the disc.
Anybody know a free program I can that will work with Monster House?
I was getting really frustrated with it. But now I'm annoyed that I can't get in onto my ipod.
Oh, and my Blades of Glory region 2 worked. So I don't know if it depends on the region of the disc.
Anybody know a free program I can that will work with Monster House?
-
- Posts: 2
- Joined: Fri Dec 28, 2007 8:44 pm
thanks for telling me what doesn't work but now what?
Can this "zero" effect be fixed? and if so when will handbreak update to fix it?
Re: thanks for telling me what doesn't work but now what?
Sure can. DTOX does it regularly on the Mac, AnyDVD is a great choice on Windows.planetoftheducks wrote:Can this "zero" effect be fixed?
Exactly never. This is intentional copyright protection on the part of the studios and HandBrake is not an anti-protection tool.planetoftheducks wrote:and if so when will handbreak update to fix it?
Rodney
Ditto. In HandBrake from the Rush Hour 3 DVD only a few of the misc tracks show up. No main feature(s).MapleLeaf wrote:Anyone know how to rip Rush Hour 3? I can't get it to rip using handbrake or MTR. MTR says 'Warning BUP and IFO not the same."
(MTR 14j had mixed results... Unsure yet if any really worked. Will likely update this post later.)
-
- Moderator
- Posts: 1804
- Joined: Mon Mar 26, 2007 12:07 am
]
Now, being that I refuse to "support" MTR, I had to use *all* resources available. That said, I'm sure the route I had to go about getting this to work is by far unpractical...to most! So here is the abridge version:
~Cav
OK, kids...The word of the day is [Censored]. As in, "This damn title was a [Censored] to rip.MapleLeaf wrote:Anyone know how to rip Rush Hour 3? I can't get it to rip using handbrake or MTR. MTR says 'Warning BUP and IFO not the same."
Now, being that I refuse to "support" MTR, I had to use *all* resources available. That said, I'm sure the route I had to go about getting this to work is by far unpractical...to most! So here is the abridge version:
- XP in VM Fusion
AnyDVD (demo) against DVD
Transmit against Xlight
Title 20 in HB
~Cav
-
- Moderator
- Posts: 1804
- Joined: Mon Mar 26, 2007 12:07 am
-
- Moderator
- Posts: 1804
- Joined: Mon Mar 26, 2007 12:07 am
Ratatouille or drive issue?
Got a few DVDs for Christmas and just sat down to rip them to add to my movie library. I saw appleTvHandbrakeHappy's post and decided to give it a whirl - unfortunately after scanning (which took a bit longer than usual, but nothing horrible) HB 0.9.1 reported "Source: No valid title found".
As others have had success with this DVD and this version of HB, I'm casting my suspicions on my MacBook Pro's DVD drive. In the past I've noticed that slimline drives (such as those found on laptops) are frequently unable to rip either from HB or MTR - whereas older drives do not seem to suffer from this problem. Can others confirm whether or not they've seen this issue as well? Am I on the right track here?
If I am, does anybody have any suggestions about where I might be able to find an external drive for my laptop that is more rip-friendly?
Thanks!
As others have had success with this DVD and this version of HB, I'm casting my suspicions on my MacBook Pro's DVD drive. In the past I've noticed that slimline drives (such as those found on laptops) are frequently unable to rip either from HB or MTR - whereas older drives do not seem to suffer from this problem. Can others confirm whether or not they've seen this issue as well? Am I on the right track here?
If I am, does anybody have any suggestions about where I might be able to find an external drive for my laptop that is more rip-friendly?
Thanks!
My apologies... I was looking to know whether or not there was general knowledge of issues with certain DVD drives as opposed to others. Some of the discs that I have been having issues with recently are Ratatouille, Spiderman 3 and Harry Potter and the Order of the Phoenix. Instead of wasting everybody's time asking questions focused on those specific titles, I was looking for a common thread.
An example of a DVD that wouldn't rip on this drive - but would on an older one - is Hannibal Rising. I seem to recall having many other such experiences as I was converting my library, but that's the only one I can remember off hand.
An example of a DVD that wouldn't rip on this drive - but would on an older one - is Hannibal Rising. I seem to recall having many other such experiences as I was converting my library, but that's the only one I can remember off hand.