Page 1 of 1

Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 5:48 am
by kagharaht
I've decided to use my older iMac, first Intel Core Duo to free up time for my MBP when traveling. It will be slow as molasses to encode. Still I figure I can let it run for a few days while gone to do a couple of files. I noticed that auto crop doesn't work anymore. I've tried clearing all presets, and even deleted Handbrake and reinstalled. Still zero cropping. I've attached the activity log for one of my files I was testing out.

I realize that this is the older version for 32bit version of HB, so I'm not sure if support is still considered for this version. Thanks for considering a look at it.

Code: Select all

HandBrake Activity Log for Session (Cleared): 2012-03-27 22:17:25 -0700

[22:17:25] hb_init: checking cpu count
[22:17:25] hb_init: starting libhb thread
[22:17:25] macgui: Handbrake Version: 0.9.5 i386 (2011010300)
[22:17:25] hb_init: checking cpu count
[22:17:25] hb_init: starting libhb thread
[22:17:25] hb_init: checking cpu count
[22:17:25] hb_init: starting libhb thread
[22:17:26] macgui: hbInstances path to this instance: /Users/********/Desktop/HandBrake.app
[22:17:26] macgui: hbInstance found instance pidnum:2666 at path: /Users/********/Desktop/HandBrake.app
[22:17:26] macgui: hbInstance MATCH FOUND, our pidnum is:2666
[22:17:26] macgui: Pid for this instance:2666
[22:17:26] macgui: HBQueueController : My Pidnum is 2666
[22:17:30] macgui: trying to open video_ts folder (parent directory chosen)
[22:17:30] macgui: Preview: Disabling HUD Controls
[22:17:30] macgui: Minimum length of title for scan: 900000
[22:17:30] hb_scan: path=/Volumes/********/RIPS/Sucker_Punch.mkv, title_index=0
libbluray/bdnav/index_parse.c:157: indx_parse(): error opening /Volumes/********/RIPS/Sucker_Punch.mkv/BDMV/index.bdmv
libbluray/bluray.c:960: nav_get_title_list(/Volumes/********/RIPS/Sucker_Punch.mkv) failed (0x2832c00)
[22:17:30] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 4.1.3
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[22:17:30] dvd: not a dvd - trying as a stream/file instead
Input #0, matroska,webm, from '/Volumes/********/RIPS/Sucker_Punch.mkv':
  Metadata:
    title           : Sucker Punch
  Duration: 02:07:29.68, start: 0.000000, bitrate: 1536 kb/s
    Chapter #0.0: start 0.000000, end 359.984578
    Metadata:
      title           : Chapter 00
    Chapter #0.1: start 359.984578, end 745.703222
    Metadata:
      title           : Chapter 01
    Chapter #0.2: start 745.703222, end 1499.456200
    Metadata:
      title           : Chapter 02
    Chapter #0.3: start 1499.456200, end 2175.589956
    Metadata:
      title           : Chapter 03
    Chapter #0.4: start 2175.589956, end 2555.719711
    Metadata:
      title           : Chapter 04
    Chapter #0.5: start 2555.719711, end 3462.500556
    Metadata:
      title           : Chapter 05
    Chapter #0.6: start 3462.500556, end 3689.936089
    Metadata:
      title           : Chapter 06
    Chapter #0.7: start 3689.936089, end 4873.118089
    Metadata:
      title           : Chapter 07
    Chapter #0.8: start 4873.118089, end 5823.525867
    Metadata:
      title           : Chapter 08
    Chapter #0.9: start 5823.525867, end 6799.542533
    Metadata:
      title           : Chapter 09
    Chapter #0.10: start 6799.542533, end 7305.756578
    Metadata:
      title           : Chapter 10
    Chapter #0.11: start 7305.756578, end 7649.683000
    Metadata:
      title           : Chapter 11
    Stream #0.0(eng): Video: h264, yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 23.98 fps, 24 tbr, 1k tbn, 47.95 tbc
    Stream #0.1(eng): Audio: dca, 48000 Hz, 5.1, s16, 1536 kb/s
    Metadata:
      title           : 3/2+1
[22:17:30] scan: decoding previews for title 1
[22:17:30] scan: audio 0x1: DCA, rate=48000Hz, bitrate=1536000 English (DTS) (5.1 ch)
[22:17:33] scan: 10 previews, 1920x1080, 24.000 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 1:1
[22:17:33] scan: title (0) job->width:1920, job->height:1072
[22:17:33] libhb: scan thread found 1 valid title(s)
[22:17:33] macgui: showNewScan: This is a new source item scan
[22:17:33] macgui: Preview: Enabling HUD Controls

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 7:58 am
by Smithcraft
I believe that there is no support for prior versions of Handbrake. I think you would find the current nightly releases to be much better. Unless you need to target a file size.

Or if you still need to use 0.9.5 because of the OS, then you might be able to find out when support for 10.5(I'm guessing you might not have upgraded an old system) was phased out, and see if anyone has a nightly available to share with you.

SC

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 12:27 pm
by Rodeo
Known bug in 0.9.5 - should be fixed in 0.9.6.

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 2:44 pm
by kagharaht
Smithcraft wrote:I believe that there is no support for prior versions of Handbrake. I think you would find the current nightly releases to be much better. Unless you need to target a file size.

Or if you still need to use 0.9.5 because of the OS, then you might be able to find out when support for 10.5(I'm guessing you might not have upgraded an old system) was phased out, and see if anyone has a nightly available to share with you.

SC
The old iMac is stuck at 10.6, so 32bit HB is the only version it can run. It may be old and slow for things like HB, but that guy has been a workhorse for the family and runs at a pretty good clip for most productivity applications. Thanks.

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 2:45 pm
by kagharaht
Rodeo wrote:Known bug in 0.9.5 - should be fixed in 0.9.6.
Oh okay. I'll look for the 0.9.6 32bit. Thanks.

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 2:47 pm
by Rodeo
What processor does your iMac use (Apple Menu > About This Mac)?

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 2:52 pm
by kagharaht
Rodeo wrote:What processor does your iMac use (Apple Menu > About This Mac)?
Oh its the old 1.83 Ghz Intel Core Duo. Mac OS X 10.6.8 is the highest this machine can go.

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 2:56 pm
by kagharaht
Oh duh. I just checked, no version for 32 bit for Intel Mac. Oh well.

http://handbrake.fr/downloads.php

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 3:20 pm
by Rodeo
kagharaht wrote:
Rodeo wrote:What processor does your iMac use (Apple Menu > About This Mac)?
Oh its the old 1.83 Ghz Intel Core Duo. Mac OS X 10.6.8 is the highest this machine can go.
OS version is not relevant. Even Tiger (OS X 10.4) can run 64-bit applications.

Unfortunately, your processor (Core Duo) is not 64-bit capable.

Re: Auto Crop on 0.9.5 a i386 always at zero

Posted: Wed Mar 28, 2012 5:00 pm
by kagharaht
Rodeo wrote:
kagharaht wrote:
Rodeo wrote:What processor does your iMac use (Apple Menu > About This Mac)?
Oh its the old 1.83 Ghz Intel Core Duo. Mac OS X 10.6.8 is the highest this machine can go.
OS version is not relevant. Even Tiger (OS X 10.4) can run 64-bit applications.

Unfortunately, your processor (Core Duo) is not 64-bit capable.
Thanks for the clarification. :-)