Page 1 of 1
Little help compiling in Linux
Posted: Tue Mar 22, 2016 8:18 pm
by J. Scott Elblein
Admittedly, I'm not a Linux guru, and following
this guide, I'm trying to compile the libhb.dll and cli in Linux Mint 17. I'm mainly trying to re-add FDK-AAC, but also read another guy's comment somewhere else, that it's also possible to compile so 10 and 12 Bit HEVC are added. I want to be able to also do 10 Bit HEVC (not sure how to do that part yet, either).
<snip> compiling Handbrake from scratch with FDK enabled. Also, if you compile the nightline you get the ability to use HEVC 8, 10, and 12 bit. Also, AVC 10bit.
I figured I'd use the latest Nighty's GUI along with the 2 files I compiled myself, so that I don't have to manually compile the GUI, but even if I have to, that part is a non-issue for me.
I'm getting some errors though, that I'm not sure how to resolve ...
If there was any exception or error displayed, please copy it and paste it here:
I'm running this configure command:
Code: Select all
./configure --cross=x86_64-w64-mingw32 --enable-x265 --enable-qsv --enable-hwd --enable-fdk --launch-jobs=1 --launch
In the terminal, I get this error:
Code: Select all
: configure: error: in `/home/osboxes/HandBrake/build/contrib/fdkaac/fdk-aac-0.1.4':
: configure: error: C++ preprocessor "/lib/cpp" fails sanity check
In the Verbose log, I get this:
http://pastebin.com/iT7jMaZy
I've looked in the HandBrake/Downloads folder and do see the fdk-aac.gz file there, so it looks like it at least downloaded fine.
Anyone have any advice to get me over this hump?
TIA
Re: Little help compiling in Linux
Posted: Wed Mar 23, 2016 11:23 pm
by J. Scott Elblein
Anyone?
Bueller?
Bueller ... ?
Bueller ....... ?
J/K ... nevermind. Got it figured out.
Re: Little help compiling in Linux
Posted: Thu Mar 24, 2016 12:20 am
by mduell
Great! Thanks for sharing the solution with the community!
Re: Little help compiling in Linux
Posted: Sun May 29, 2016 4:11 pm
by chumanga
J. Scott Elblein wrote:Anyone?
Bueller?
Bueller ... ?
Bueller ....... ?
J/K ... nevermind. Got it figured out.
How do you solve the problem? I'm having same error while trying to compile in Ubuntu 14.04 for Windows.
Re: Little help compiling in Linux
Posted: Tue May 31, 2016 2:15 pm
by chumanga
Code: Select all
/bin/grep: /home/mingw-w64/mingw-w64/linux-x86_64-x86_64/build/build/root/x86_64-w64-mingw32/lib/../lib/libstdc++.la: No such file or directory
: /bin/sed: can't read /home/mingw-w64/mingw-w64/linux-x86_64-x86_64/build/build/root/x86_64-w64-mingw32/lib/../lib/libstdc++.la: No such file or directory
: libtool: error: '/home/mingw-w64/mingw-w64/linux-x86_64-x86_64/build/build/root/x86_64-w64-mingw32/lib/../lib/libstdc++.la' is not a valid libtool archive
: make[3]: ** [libass.la] Erro 1
: make[3]: Saindo do diretório `/home/ubuntu/HandBrake/build/contrib/libass/libass-0.13.2/libass'
: make[2]: ** [all-recursive] Erro 1
: make[2]: Saindo do diretório `/home/ubuntu/HandBrake/build/contrib/libass/libass-0.13.2'
: make[1]: ** [all] Erro 2
: make[1]: Saindo do diretório `/home/ubuntu/HandBrake/build/contrib/libass/libass-0.13.2'
: make: ** [contrib/libass/.stamp.build] Erro 2
-------------------------------------------------------------------------------
time end: Tue May 31 03:13:57 2016
duration: 11 minutes, 18 seconds (678.13s)
result: FAILURE (code 2)
Someone can give some advise?
Re: Little help compiling in Linux
Posted: Fri Jun 03, 2016 8:16 pm
by chumanga
Ok i found the problem. The directory inside libstdc++.la file has this place(/home/mingw-w64/mingw-w64/linux-x86_64-x86_64/build/build/root/x86_64-w64-mingw32/lib/../lib/) which dont exist in my system and i need to change it to real directory which is /home/ubuntu/mingw/mingw/lib/libstdc++.la. Now it worked sucessfully.
Re: Little help compiling in Linux
Posted: Sun Jul 03, 2016 3:08 am
by hotbbq
chumanga wrote:Ok i found the problem. The directory inside libstdc++.la file has this place(/home/mingw-w64/mingw-w64/linux-x86_64-x86_64/build/build/root/x86_64-w64-mingw32/lib/../lib/) which dont exist in my system and i need to change it to real directory which is /home/ubuntu/mingw/mingw/lib/libstdc++.la. Now it worked sucessfully.
I'm having the same issue. What file did you have to change to point to the correct directory?
Re: Little help compiling in Linux
Posted: Sun Jul 03, 2016 1:51 pm
by stryfewalker
I just started a
thread yesterday that mentioned this problem.
The libstdc++.la is an editable text file. At the bottom of that file is a reference to the directory that is causing the problem. You need to replace the directory that is specified to the correct directory. On my setup and chumanga's setup it was "/home/<USER>/mingw/mingw/lib/" where <USER> is most likely a unique name. For chumanga his was ubuntu, for me it was my first name.
Hopefully, this will help you out.
Re: Little help compiling in Linux
Posted: Thu Jul 07, 2016 8:28 pm
by BradleyS
You're probably using a prebuilt mingw toolchain, configured with a sysroot that doesn't match its location on your system. Hint: delete all the .la files, or fix the paths in them.
Re: Little help compiling in Linux
Posted: Thu Jul 07, 2016 9:54 pm
by BradleyS
I should add, if you'd like to build a proper mingw toolchain, try the bash script included with HandBrake's source at scripts/mingw-w64-build. This is what is used as the cross-compilation toolchain for the nightly builds.
Note that there is currently an issue with image previews on Windows that we hope to resolve soon; see
https://github.com/HandBrake/HandBrake/issues/246. Video previews work fine.
Re: Little help compiling in Linux
Posted: Fri Aug 12, 2016 3:32 pm
by ByteShare
I had this same issue (Error 2).
I had to edit:
Located (for me):
Code: Select all
/home/test/mingw/x86_64-w64-mingw32/lib
Change from (Last option in file):
Code: Select all
'/home/mingw-w64/mingw-w64/linux-x86_64-x86_64/build/build/root/x86_64-w64-mingw32/lib/../lib'
Change To:
Code: Select all
'/home/test/mingw/x86_64-w64-mingw32/lib'
Re: Little help compiling in Linux
Posted: Fri Aug 12, 2016 6:07 pm
by Deleted User 11865
To make things simpler, you can just remove all .la files from your MinGW toolchain folder.
Re: Little help compiling in Linux
Posted: Tue Aug 23, 2016 6:20 pm
by ByteShare
Rodeo wrote:To make things simpler, you can just remove all .la files from your MinGW toolchain folder.
Really? I'll have to try that. Didn't know that wouldn't screw things up.