Page 1 of 1
Issues with CLI on Ubuntu 14.04
Posted: Wed May 07, 2014 3:10 am
by zane131
I have a clean install of Ubuntu GNOME 14.04 and installed Handbrake (GUI and CLI) from Ubuntu's Software Center. I can successfully converted videos with the GUI using multiple presets. Unfortunately, I am unable to get the CLI to work. All of the presets give me the following:
I experimented by overriding the audio encoder with the -E option. I got the same error code as above with faac and copy:aac. Then, I tried all of the other audio encoders listed in HandbrakeCLI --help and got the following error:
Code: Select all
ERROR: MP4 muxer disabled, exiting
Any help would be appreciated.
Re: Issues with CLI on Ubuntu 14.04
Posted: Wed May 07, 2014 6:49 am
by TedJ
You're trying to encode to MP4 and Ubuntu in their infinite wisdom have removed MP4 support in their builds. Download from handbrake.fr and install manually.
Re: Issues with CLI on Ubuntu 14.04
Posted: Thu May 08, 2014 3:13 am
by zane131
Thanks for pointing this out. I didn't pick up on it yesterday. It's irritating that they stripped the mp4 support from the version available in the Ubuntu repos. Any thoughts on where to report this?
The ppa listed on handbrake.fr doesn't support 14.04. Looks like it hasn't been updated for close to a year.
Code: Select all
W: Failed to fetch http://ppa.launchpad.net/stebbins/handbrake-releases/ubuntu/dists/trusty/main/binary-amd64/Packages 404 Not Found
W: Failed to fetch http://ppa.launchpad.net/stebbins/handbrake-releases/ubuntu/dists/trusty/main/binary-i386/Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
After more searching on the all powerful Google, I found a solution here:
http://iloveubuntu.net/handbrake-099-la ... e-universe
Simply install the raring debs manually from here:
https://launchpad.net/~stebbins/+archiv ... ld/4589165
Then run the following after installing the debs or they will be updated to the cut down version from the Ubuntu repos.
Code: Select all
sudo apt-mark hold handbrake-gtk handbrake-cli
Re: Issues with CLI on Ubuntu 14.04
Posted: Thu May 08, 2014 9:44 am
by TedJ
No, you'll need to use the nightly builds for 14.04 although we're hoping for the next stable release shortly.
The reason mp4 was stripped from the Ubuntu repos was because the library used for muxing mp4 (mp4v2) is not distributed under a GPL compatible licence. We're switching to libavformat for the next release to address this problem.
Re: Issues with CLI on Ubuntu 14.04
Posted: Sat Jun 07, 2014 4:20 am
by zane131
TedJ wrote:... although we're hoping for the next stable release shortly.
Just checking up on this because it has been a while. Anyone know when this will be put in the stable release or where to check?
Re: Issues with CLI on Ubuntu 14.04
Posted: Sat Jun 07, 2014 9:22 am
by s55
There is no ETA. The news page on the site will be the firs place to be updated when we hit 1.0
Re: Issues with CLI on Ubuntu 14.04
Posted: Sat Aug 30, 2014 5:13 pm
by Dapsol
Hi,
i've installed HandBrake-cli on Debian Wheezy from "deb
http://cdn.debian.net/debian wheezy-backports main", and i'm getting the exact same error:
Code: Select all
ERROR: MP4 muxer disabled, exiting
Any tips on how to fix this would be very welcome
(reason to get a nightly build is because it can handle subtitles in blu-rays..)
Re: Issues with CLI on Ubuntu 14.04
Posted: Sat Aug 30, 2014 8:04 pm
by s55
Uninstall that, and install the official nightly. That is not a nightly. That is just a deliberately broken version they ship to annoy us.
Re: Issues with CLI on Ubuntu 14.04
Posted: Sun Aug 31, 2014 9:19 am
by Dapsol
Ok thanks, but is it possible to build the nightly on Debian Wheezy?
I've tried building from source and i get a build error:
Code: Select all
sudo apt-get install checkinstall build-essential subversion yasm build-essential autoconf libtool \
zlib1g-dev libbz2-dev libogg-dev libtheora-dev libvorbis-dev \
libsamplerate-dev libxml2-dev libfribidi-dev libfreetype6-dev \
libfontconfig1-dev libass-dev intltool libglib2.0-dev libdbus-glib-1-dev \
libgtk2.0-dev libgudev-1.0-dev libwebkit-dev libnotify-dev \
libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libappindicator-dev
svn checkout svn://svn.handbrake.fr/HandBrake/trunk hb-trunk
cd hb-trunk
./configure --launch --disable-gtk
Last lines of build.txt :
Code: Select all
: /bin/mkdir -p '/home/david/scripts/hb-trunk/build/contrib/include/libbluray'
: /usr/bin/install -c -m 644 file/filesystem.h libbluray/bdnav/clpi_data.h libbluray/bdnav/meta_data.h libbluray/bluray-version.h libbluray/bluray.h libbluray/decoders/overlay.h libbluray/keys.h util/log_control.h '/home/david/scripts/hb-trunk/build/contrib/include/libbluray'
: make[3]: Leaving directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0/src'
: make[2]: Leaving directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0/src'
: make[2]: Entering directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0'
: make[3]: Entering directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0'
: make[3]: Nothing to be done for `install-exec-am'.
: make[3]: Nothing to be done for `install-data-am'.
: make[3]: Leaving directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0'
: make[2]: Leaving directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0'
: make[1]: Leaving directory `/home/david/scripts/hb-trunk/build/contrib/libbluray/libbluray-0.5.0'
: touch contrib/libbluray/.stamp.install
: /usr/bin/gcc -std=gnu99 -pipe -fmessage-length=0 -Wall -g0 -O3 -DUSE_LIBAV_AAC -D__LIBHB__ -DUSE_PTHREAD -DSYS_LINUX -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_X265 -DARCH_X86_64 -I./libhb/ -I./contrib/include -c ../libhb/audio_remap.c -o libhb/audio_remap.o
: /usr/bin/gcc -std=gnu99 -pipe -fmessage-length=0 -Wall -g0 -O3 -DUSE_LIBAV_AAC -D__LIBHB__ -DUSE_PTHREAD -DSYS_LINUX -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_X265 -DARCH_X86_64 -I./libhb/ -I./contrib/include -c ../libhb/audio_resample.c -o libhb/audio_resample.o
: /usr/bin/gcc -std=gnu99 -pipe -fmessage-length=0 -Wall -g0 -O3 -DUSE_LIBAV_AAC -D__LIBHB__ -DUSE_PTHREAD -DSYS_LINUX -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_X265 -DARCH_X86_64 -I./libhb/ -I./contrib/include -c ../libhb/batch.c -o libhb/batch.o
: /usr/bin/gcc -std=gnu99 -pipe -fmessage-length=0 -Wall -g0 -O3 -DUSE_LIBAV_AAC -D__LIBHB__ -DUSE_PTHREAD -DSYS_LINUX -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_X265 -DARCH_X86_64 -I./libhb/ -I./contrib/include -c ../libhb/bd.c -o libhb/bd.o
: /usr/bin/gcc -std=gnu99 -pipe -fmessage-length=0 -Wall -g0 -O3 -DUSE_LIBAV_AAC -D__LIBHB__ -DUSE_PTHREAD -DSYS_LINUX -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_X265 -DARCH_X86_64 -I./libhb/ -I./contrib/include -c ../libhb/colormap.c -o libhb/colormap.o
: /usr/bin/gcc -std=gnu99 -pipe -fmessage-length=0 -Wall -g0 -O3 -DUSE_LIBAV_AAC -D__LIBHB__ -DUSE_PTHREAD -DSYS_LINUX -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_X265 -DARCH_X86_64 -I./libhb/ -I./contrib/include -c ../libhb/common.c -o libhb/common.o
: ../libhb/common.c:16:18: fatal error: x264.h: No such file or directory
: compilation terminated.
: make: *** [libhb/common.o] Error 1
-------------------------------------------------------------------------------
time end: Sun Aug 31 10:30:20 2014
duration: 29 minutes, 47 seconds (1787.29s)
result: FAILURE (code 2)
-------------------------------------------------------------------------------
Build is finished!
Re: Issues with CLI on Ubuntu 14.04
Posted: Sun Aug 31, 2014 1:54 pm
by JohnAStebbins
You need to read the build documentation in doc/BUILD-Linux. You are missing packages that are required in order to build handbrake.
Re: Issues with CLI on Ubuntu 14.04
Posted: Sun Aug 31, 2014 3:28 pm
by Dapsol
Thanks for pointing me in the right direction, i've installed the packages listed in the 'BUILD-Linux' file (for Ubuntu) but still getting the same error when building.
Re: Issues with CLI on Ubuntu 14.04
Posted: Sun Aug 31, 2014 9:33 pm
by JohnAStebbins
You are missing libx264-dev which is certainly listed in the BUILD-Linux file.
Re: Issues with CLI on Ubuntu 14.04
Posted: Sun Aug 31, 2014 9:53 pm
by Dapsol
Oops, sorry you are right. The BUILD-Linux file is a bit confusing i think, it says:
To install these packages:
sudo apt-get install subversion yasm build-essential autoconf libtool \
zlib1g-dev libbz2-dev libogg-dev libtheora-dev libvorbis-dev \
libsamplerate-dev libxml2-dev libfribidi-dev libfreetype6-dev \
libfontconfig1-dev libass-dev libmp3lame-dev intltool libglib2.0-dev \
libdbus-glib-1-dev libgtk-3-dev libgudev-1.0-dev libwebkitgtk-3.0-dev \
libnotify-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev \
libappindicator-dev
However, this list seems not 100% complete, because as you said there are other packages listed as well a few lines above this text
So now i installed these, and i have a successful build
Thank you for your assistance, i'm not used to doing this stuff so...
Code: Select all
apt-get install subversion yasm build-essential autoconf libtool zlib1g-dev libbz2-dev libxml2-dev libogg-dev libvorbis-dev libsamplerate-dev libfribidi-dev libfreetype6-dev libfontconfig1-dev libass-dev libmp3lame-dev libx264-dev intltool libglib2.0-dev libdbus-glib-1-dev libgtk-3-dev libgudev-1.0-dev libwebkitgtk-3.0-dev libnotify-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libappindicator-dev libtheora-dev
Re: Issues with CLI on Ubuntu 14.04
Posted: Mon Sep 01, 2014 2:16 pm
by JohnAStebbins
Ah, thanks for pointing out the documentation error. Will fix that.
Re: Issues with CLI on Ubuntu 14.04
Posted: Mon Sep 12, 2016 6:28 am
by jonalbert123
[color=#000000]zan[/color][/url][url=http://www.traguspiercing.xyz/][color=#000000]e131[/color] wrote:
I have a clean install of Ubuntu GNOME 14.04 and installed Handbrake (GUI and CLI) from Ubuntu's Software Center. I can successfully converted videos with the GUI using multiple presets. Unfortunately, I am unable to get the CLI to work. All of the presets give me the following:
I experimented by overriding the audio encoder with the -E option. I got the same error code as above with faac and copy:aac. Then, I tried all of the other audio encoders listed in HandbrakeCLI --help and got the following error:
Code: Select all
ERROR: MP4 muxer disabled, exiting
Any help would be appreciated.
I was getting same kind of problem but i have fixed that by re configuring all parameters.