Log file message: Core auxiliary data reserved content is not implemented.

Archive of historical bug reports.
Please use the GitHub link above to report issues.
Forum rules
*******************************
Please be aware we are now using GitHub for issue tracking and feature requests.
- This section of the forum is now closed to new topics.

*******************************
Post Reply
hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Sun Jun 12, 2016 3:49 am

Please describe the problem in as much detail as possible:
When transcoding blu-ray movie "Aeon Flux" and selecting the DTS track as input, the log fills up with the same error, and transcode eventually aborts when log file gets too big.

What are the steps to reproduce this problem:
Loaded the .M2TS file for the above movie, selected the DTS-HD track to convert to AAC, start the job.

What version of HandBrake you are running:
Was using 0.10.5. Nightly build (04 June) installed over the top, on the first 5 minutes of the input file, exhibits the same behaviour.

What operating system and version and you running (e.g. OSX 10.11, Windows 7, Ubuntu 14):
Windows 10 64-bit.

If there was any exception or error displayed, please copy it and paste it here:
Log file lines, repeated endlessly. See below.

Could be being generated from this code:

Code: Select all

 1041                 avpriv_request_sample(s->avctx,
 1042                                       "Core auxiliary data reserved content");
 
see e.g.
https://ffmpeg.org/doxygen/2.6/dcadec_8c_source.html
i.e. FFMpeg library 2.x. Just a guess.

Can this LOC simply be removed in your project??

Please include the scan or encode log:

Code: Select all

 
[13:20:59] scan: decoding previews for title 1
[13:20:59] file is MPEG Transport Stream with 192 byte packets offset 4 bytes
[13:20:59] scan: audio 0x1104: ac3, rate=48000Hz, bitrate=192000 Unknown (AC3) (2.0 ch) (Dolby Surround)
[13:20:59] scan: audio 0x1105: ac3, rate=48000Hz, bitrate=192000 Unknown (AC3) (2.0 ch) (Dolby Surround)
[13:20:59] scan: audio 0x1100: ac3, rate=48000Hz, bitrate=640000 Unknown (AC3) (5.1 ch)
[13:20:59] scan: audio 0x1102: ac3, rate=48000Hz, bitrate=640000 Unknown (AC3) (5.1 ch)
[13:20:59] scan: audio 0x1103: ac3, rate=48000Hz, bitrate=640000 Unknown (AC3) (5.1 ch)
[dca @ 000001f55558b280] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55558b280] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[13:20:59] scan: audio 0x1101: dca, rate=48000Hz, bitrate=1536000 Unknown (DTS) (5.1 ch)
[13:21:00] stream: 17 good frames, 0 errors (0%)
 
then

x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
x264 [info]: profile Main, level 4.0
[ipod @ 000001f562e461e0] Warning, extension is not .m4a nor .m4v Quicktime/Ipod might not play the file
[ipod @ 000001f562e461e0] Warning, extension is not .m4a nor .m4v Quicktime/Ipod might not play the file
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.

rollin_eng
Veteran User
Posts: 3163
Joined: Wed May 04, 2011 11:06 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by rollin_eng » Sun Jun 12, 2016 9:17 am

Can you post your full log, removing any repeating lines if necessary.

hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Sun Jun 12, 2016 9:25 am

Log file contents (stored with output file) below is for encoding only the first 5:00 mins. This task completed.

Code: Select all

HandBrake Nightly 20160604111422-9206444-master (2016060501) - 64bit Version
OS: Microsoft Windows NT 10.0.10586.0 - 64bit
CPU: Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz
Ram: 12247 MB, 
GPU Information:
  NVIDIA GeForce GTX 760 - 10.18.13.6191
Screen: 2560x1440
Temp Dir: C:\Users\______\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\______\AppData\Roaming\HandBrake Team\HandBrake\0.0.0.0

-------------------------------------------


# Starting Encode ...

[13:20:59] 1 job(s) to process
[13:20:59] json job:
{

  "Audio": {

    "AudioList": [

      {

        "Bitrate": 160,

        "DRC": 0.0,

        "Encoder": 65536,

        "Gain": 0.0,

        "Mixdown": 6,

        "NormalizeMixLevel": false,

        "Samplerate": 0,

        "Track": 1,

        "DitherMethod": 0

      }

    ],

    "CopyMask": [

      1073807360,

      1073743872,

      1074003968,

      1073750016,

      1090519040,

      1074790400,

      1074266112,

      1107296256

    ],

    "FallbackEncoder": 2048

  },

  "Destination": {

    "ChapterList": [

      {

        "Name": "Chapter 1"

      }

    ],

    "ChapterMarkers": true,

    "File": "T:\\Blu-ray FINAL\\Aeon Flux (2005).mp4",

    "Mp4Options": {

      "IpodAtom": true,

      "Mp4Optimize": true

    },

    "Mux": 131072

  },

  "Filters": {

    "FilterList": [

      {

        "ID": 4,

        "Settings": {

          "mode": "7"

        }

      },

      {

        "ID": 11,

        "Settings": {

          "crop-bottom": "90",

          "crop-left": "160",

          "crop-right": "160",

          "crop-top": "90",

          "height": "900",

          "width": "1600"

        }

      },

      {

        "ID": 6,

        "Settings": {

          "mode": "1"

        }

      }

    ]

  },

  "PAR": {

    "Num": 1,

    "Den": 1

  },

  "Metadata": {},

  "SequenceID": 0,

  "Source": {

    "Angle": 1,

    "Range": {

      "Type": "time",

      "Start": 0,

      "End": 27000000

    },

    "Title": 1,

    "Path": "Z:\\Movie Library\\Blu-Ray\\DISC_IMAGE\\AEON_FLUX (2005).m2ts"

  },

  "Subtitle": {

    "Search": {

      "Burn": false,

      "Default": false,

      "Enable": false,

      "Forced": false

    },

    "SubtitleList": []

  },

  "Video": {

    "Encoder": 65536,

    "Level": "4.0",

    "TwoPass": false,

    "Turbo": false,

    "ColorMatrixCode": 0,

    "Options": "",

    "Preset": "superfast",

    "Profile": "main",

    "Quality": 21.0,

    "OpenCL": false,

    "HWDecode": false,

    "QSV": {

      "Decode": true,

      "AsyncDepth": 0

    }

  }

}
[13:20:59] CPU: Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz
[13:20:59]  - logical processor count: 8
[13:20:59] OpenCL device #1: NVIDIA Corporation GeForce GTX 760
[13:20:59]  - OpenCL version: 1.2 CUDA
[13:20:59]  - driver version: 361.91
[13:20:59]  - device type:    GPU
[13:20:59]  - supported:      no
[13:20:59] Intel Quick Sync Video support: no
[13:20:59] hb_scan: path=Z:\Movie Library\Blu-Ray\DISC_IMAGE\AEON_FLUX (2005).m2ts, title_index=1
udfread ERROR: ECMA 167 Volume Recognition failed
src/libbluray/disc/disc.c:274: failed opening UDF image Z:\Movie Library\Blu-Ray\DISC_IMAGE\AEON_FLUX (2005).m2ts
src/libbluray/disc/disc.c:352: error opening file BDMV\index.bdmv
src/libbluray/disc/disc.c:352: error opening file BDMV\BACKUP\index.bdmv
[13:20:59] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.1
libdvdread: Encrypted DVD support unavailable.
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[13:20:59] dvd: not a dvd - trying as a stream/file instead
[13:20:59] file is MPEG Transport Stream with 192 byte packets offset 4 bytes
[13:20:59] Found the following PIDS
[13:20:59]     Video PIDS : 
[13:20:59]       0x1011 type MPEG2 (0x2)
[13:20:59]     Audio PIDS : 
[13:20:59]       0x1100 type AC3 (0x81)
[13:20:59]       0x1101 type DTS (0x82)
[13:20:59]       0x1102 type AC3 (0x81)
[13:20:59]       0x1103 type AC3 (0x81)
[13:20:59]       0x1104 type AC3 (0x81)
[13:20:59]       0x1105 type AC3 (0x81)
[13:20:59]     Subtitle PIDS : 
[13:20:59]       0x1200 type PGS Subtitle (0x90)
[13:20:59]       0x1201 type PGS Subtitle (0x90)
[13:20:59]       0x1202 type PGS Subtitle (0x90)
[13:20:59]       0x1203 type PGS Subtitle (0x90)
[13:20:59]     Other PIDS : 
[13:20:59]       0x1001 type Unknown (0xff) (PCR)
[13:20:59] stream id 0x1100 (type 0x81 substream 0x0) audio 0x1100
[13:20:59] stream id 0x1101 (type 0x82 substream 0x0) audio 0x1101
[13:20:59] stream id 0x1102 (type 0x81 substream 0x0) audio 0x1102
[13:20:59] stream id 0x1103 (type 0x81 substream 0x0) audio 0x1103
[13:20:59] stream id 0x1104 (type 0x81 substream 0x0) audio 0x1104
[13:20:59] stream id 0x1105 (type 0x81 substream 0x0) audio 0x1105
[13:20:59] stream id 0x1200 (type 0x90 substream 0x0) subtitle 0x1200
[13:20:59] stream id 0x1201 (type 0x90 substream 0x0) subtitle 0x1201
[13:20:59] stream id 0x1202 (type 0x90 substream 0x0) subtitle 0x1202
[13:20:59] stream id 0x1203 (type 0x90 substream 0x0) subtitle 0x1203
[13:20:59] scan: decoding previews for title 1
[13:20:59] file is MPEG Transport Stream with 192 byte packets offset 4 bytes
[13:20:59] scan: audio 0x1104: ac3, rate=48000Hz, bitrate=192000 Unknown (AC3) (2.0 ch) (Dolby Surround)
[13:20:59] scan: audio 0x1105: ac3, rate=48000Hz, bitrate=192000 Unknown (AC3) (2.0 ch) (Dolby Surround)
[13:20:59] scan: audio 0x1100: ac3, rate=48000Hz, bitrate=640000 Unknown (AC3) (5.1 ch)
[13:20:59] scan: audio 0x1102: ac3, rate=48000Hz, bitrate=640000 Unknown (AC3) (5.1 ch)
[13:20:59] scan: audio 0x1103: ac3, rate=48000Hz, bitrate=640000 Unknown (AC3) (5.1 ch)
[dca @ 000001f55558b280] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55558b280] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[13:20:59] scan: audio 0x1101: dca, rate=48000Hz, bitrate=1536000 Unknown (DTS) (5.1 ch)
[13:21:00] stream: 17 good frames, 0 errors (0%)
[13:21:00] scan: 10 previews, 1920x1080, 23.976 fps, autocrop = 132/132/0/0, aspect 16:9, PAR 1:1
[13:21:00] libhb: scan thread found 1 valid title(s)
[13:21:00] starting job
[13:21:00] yadif thread started for segment 0
[13:21:00] yadif thread started for segment 1
[13:21:00] yadif thread started for segment 7
[13:21:00] work: track 1, dithering not supported by codec
[13:21:00] yadif thread started for segment 3
[13:21:00] work: only 1 chapter, disabling chapter markers
[13:21:00] job configuration:
[13:21:00]  * source
[13:21:00] yadif thread started for segment 4
[13:21:00]    + Z:\Movie Library\Blu-Ray\DISC_IMAGE\AEON_FLUX (2005).m2ts
[13:21:00]    + title 1, start 00:00:0.00 stop 00:05:0.00
[13:21:00]  * destination
[13:21:00]    + T:\Blu-ray FINAL\Aeon Flux (2005).mp4
[13:21:00]    + container: MPEG-4 (libavformat)
[13:21:00]      + optimized for HTTP streaming (fast start)
[13:21:00]      + compatibility atom for iPod 5G
[13:21:00]  * video track
[13:21:00]    + decoder: mpeg2video
[13:21:00]      + bitrate 30000 kbps
[13:21:00]    + filters
[13:21:00] yadif thread started for segment 5
[13:21:00]      + Decomb (mode=7)
[13:21:00]      + Framerate Shaper (mode=1)
[13:21:00]        + frame rate: 23.976 fps -> constant 23.976 fps
[13:21:00] yadif thread started for segment 6
[13:21:00]      + Crop and Scale (width=1600:height=900:crop-top=90:crop-bottom=90:crop-left=160:crop-right=160)
[13:21:00]        + source: 1920 * 1080, crop (90/90/160/160): 1600 * 900, scale: 1600 * 900
[13:21:00]    + Output geometry
[13:21:00]      + storage dimensions: 1600 x 900
[13:21:00] yadif thread started for segment 2
[13:21:00]      + pixel aspect ratio: 1 : 1
[13:21:00]      + display dimensions: 1600 x 900
[13:21:00]    + encoder: H.264 (libx264)
[13:21:00]      + preset:  superfast
[13:21:00]      + profile: main
[13:21:00]      + level:   4.0
[13:21:00]      + quality: 21.00 (RF)
[13:21:00]  * audio track 1
[13:21:00]    + decoder: Unknown (DTS) (5.1 ch) (track 2, id 0x1101)
[13:21:00]      + bitrate: 1536 kbps, samplerate: 48000 Hz
[13:21:00]    + mixdown: Dolby Pro Logic II
[13:21:00]    + encoder: AAC (libavcodec)
[13:21:00]      + bitrate: 160 kbps, samplerate: 48000 Hz
[13:21:00] file is MPEG Transport Stream with 192 byte packets offset 4 bytes
[13:21:00] sync: expecting 7216 video frames
[13:21:00] encx264: min-keyint: 24, keyint: 240
[13:21:00] encx264: encoding at constant RF 21.000000
[13:21:00] encx264: unparsed options: weightp=1:mbtree=0:vbv-maxrate=20000:level=4.0:analyse=i4x4,i8x8:ref=1:me=dia:subme=1:trellis=0:8x8dct=0:rc-lookahead=0:vbv-bufsize=25000:mixed-refs=0
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
x264 [info]: profile Main, level 4.0
[ipod @ 000001f562e461e0] Warning, extension is not .m4a nor .m4v Quicktime/Ipod might not play the file
[ipod @ 000001f562e461e0] Warning, extension is not .m4a nor .m4v Quicktime/Ipod might not play the file
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[13:21:00] sync: first pts video is 0
[13:21:00] sync: first pts audio 0x1101 is 0
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.

Removed 17000+ lines.

[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[13:23:44] sync: reached pts 27000000, exiting early
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.

Removed 100 lines.

[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[dca @ 000001f55556b500] If you want to help, upload a sample of this file to ftp://upload.libav.org/incoming/ and contact the libav-devel mailing list.
[dca @ 000001f55556b500] Core auxiliary data reserved content is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[13:23:45] work: average encoding speed for job is 43.544731 fps
[13:23:46] decomb: deinterlaced 7193 | blended 0 | unfiltered 0 | total 7193
[13:23:46] render: 7193 frames output, 0 dropped and 0 duped for CFR/PFR
[13:23:46] render: lost time: 0 (0 frames)
[13:23:46] render: gained time: 0 (0 frames) (0 not accounted for)
[13:23:46] stream: 7368 good frames, 0 errors (0%)
[13:23:46] dca-decoder done: 28763 frames, 0 decoder errors
[13:23:46] mpeg2video-decoder done: 7355 frames, 0 decoder errors
[13:23:46] sync: got 7193 frames, 7216 expected
[13:23:46] sync: framerate min 23.968 fps, max 23.981 fps, avg 23.976 fps
x264 [info]: frame I:84    Avg QP:13.87  size:135808
x264 [info]: frame P:3488  Avg QP:16.13  size: 62732
x264 [info]: frame B:3621  Avg QP:17.38  size: 20636
x264 [info]: consecutive B-frames: 23.1% 25.5% 11.1% 40.2%
x264 [info]: mb I  I16..4: 38.4%  0.0% 61.6%
x264 [info]: mb P  I16..4: 23.3%  0.0%  8.6%  P16..4: 50.3%  0.0%  0.0%  0.0%  0.0%    skip:17.8%
x264 [info]: mb B  I16..4:  4.5%  0.0%  0.3%  B16..8: 25.1%  0.0%  0.0%  direct:27.6%  skip:42.5%  L0:33.0% L1:45.9% BI:21.1%
x264 [info]: coded y,uvDC,uvAC intra: 75.8% 70.5% 39.3% inter: 34.1% 31.1% 2.6%
x264 [info]: i16 v,h,dc,p: 31% 16% 40% 13%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21% 18% 23%  8%  7%  6%  6%  5%  6%
x264 [info]: i8c dc,h,v,p: 47% 20% 24% 10%
x264 [info]: Weighted P-Frames: Y:6.0% UV:3.1%
x264 [info]: kb/s:8131.49
[ipod @ 000001f562e461e0] Starting second pass: moving the moov atom to the beginning of the file
[13:23:46] mux: track 0, 7193 frames, 304935998 bytes, 8130.28 kbps, fifo 2048
[13:23:46] mux: track 1, 14061 frames, 5799078 bytes, 154.62 kbps, fifo 4096
[13:23:46] libhb: work result = 0

# Encode Completed ...

rollin_eng
Veteran User
Posts: 3163
Joined: Wed May 04, 2011 11:06 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by rollin_eng » Sun Jun 12, 2016 10:08 am

What are you using to rip your disk?

hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Sun Jun 12, 2016 12:45 pm

DVDFab Passkey 8 to unprotect the disc. Then copy the M2TS track via Windows Explorer. Ripped 70+ discs so far (for playback via PC). All M2TS files play properly through VLC. Used Handbrake to convert 40 so far to MP4/H.264/AAC, this is the only title with errors. (I could try an AC3 audio track later on.) Still would appreciate finding out the cause of this misbehaviour tho.

rollin_eng
Veteran User
Posts: 3163
Joined: Wed May 04, 2011 11:06 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by rollin_eng » Sun Jun 12, 2016 12:46 pm

Can you try ripping with makemkv?

hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Sun Jun 12, 2016 12:57 pm

No, unfortunately my Sony external Blu-ray drive is not recognized by that program. Passkey + Handbrake is the only workflow I know of.

Does Handbrake 1.0 use version 3.0+ of FFMpeg libraries? I couldn't find the line-of-code above in that version via Google.

User avatar
s55
HandBrake Team
Posts: 9535
Joined: Sun Dec 24, 2006 1:05 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by s55 » Sun Jun 12, 2016 1:00 pm

HandBrake doesn't use FFMpeg, it uses LibAV.

rollin_eng
Veteran User
Posts: 3163
Joined: Wed May 04, 2011 11:06 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by rollin_eng » Sun Jun 12, 2016 1:03 pm

Can you open the Blu Ray folder, not the m2ts, and see if you get the same issue.

hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Sun Jun 12, 2016 1:42 pm

With a DTS-HD track, the log file has 46000 lines - the above scenario.
With an AC3 track, it has only 234 lines. Using version 0.10.5 - so I can continue to use my large queue file.

Incidentally, I now see opening the disc provides languages for the audio tracks. Nice feature.

User avatar
Rodeo
HandBrake Team
Posts: 12197
Joined: Tue Mar 03, 2009 8:55 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by Rodeo » Sun Jun 12, 2016 3:07 pm

We could remove it, but I added it to libav's DTS decoder in the first place, so I'm not sure I want to. This is really interesting, as this Blu-ray could feature the first widely-available DTS bitstream which includes such data in the subframe footer.

Basically I need to make the message print only once per stream instead of once per frame, that way it'll stop spamming the log (which is what's causing the GUI to then abort). That should fix the issue.

More importantly though, avpriv_request_sample exists for a reason, and we most definitely need a sample of this. Could you please first rip the disc to an MKV file (using MakeMKV), and then cut the first 10 to 60 seconds using Mkvtoolnix GUI, then upload the sample to Dropbox or any similar service and post/message us the link?

hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Mon Jun 13, 2016 12:41 am

First 50 MB is uploaded here:
http://expirebox.com/download/77fb316cd ... 94994.html
P.S. Is it safe to run multiple (2) instances of Handbrake simultaneously?

kpflugshaupt
Posts: 63
Joined: Sat Feb 06, 2010 8:00 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by kpflugshaupt » Mon Jun 13, 2016 7:01 am

hbUser3000 wrote:First 50 MB is uploaded here:
http://expirebox.com/download/77fb316cd ... 94994.html
P.S. Is it safe to run multiple (2) instances of Handbrake simultaneously?
Yes, for certain values of "safe":

- You can start several instances
- Two GUI sessions will probably compete over the queue file (unless this has been fixed lately), as there is only one queue file. If you don't queue up encodes, they may get along.
- Two CLI sessions ought to get along just fine, as well as a CLI and GUI session

Just try it out with a few short conversions, shouldn't take much time.

User avatar
Rodeo
HandBrake Team
Posts: 12197
Joined: Tue Mar 03, 2009 8:55 pm

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by Rodeo » Mon Jun 13, 2016 7:37 am

Nice, thanks!

hbUser3000
Posts: 9
Joined: Wed Jun 08, 2016 3:39 am

Re: Log file message: Core auxiliary data reserved content is not implemented.

Post by hbUser3000 » Tue Jun 14, 2016 6:33 am

Rodeo wrote:Basically I need to make the message print only once per stream instead of once per frame, that way it'll stop spamming the log (which is what's causing the GUI to then abort). That should fix the issue.
Can we have it once per second? (7200 lines for a 2-hour movie.) Irritating but not fatal. Only one occurrence of this type of log msg is likely to go unnoticed.

Also I'm curious as to the content of the subframe footer data. Is it audio, or a fingerprint etc? Can you pls post when u have something to report.

Post Reply