0.9.9.5530 source not working?
Forum rules
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
An Activity Log is required for support requests. Please read How-to get an activity log? for details on how and why this should be provided.
0.9.9.5530 source not working?
Hi All,
Long time user, but now I am having a strange problem.
I just upgraded to 0.9.9.5530.
Now when my disc's show up in the source menu, but when I select them - nothing happens.
Files pop up right away.
But, even though the disc is shown in the source menu - nothing happens when I select it.
Is there any way to force the scan?
I have attached the activity log below, but since nothing is happening when I select the disc- it does not show any activity.
Is anyone else having a problem like this?
Please advise!
Thanks Pearcle-
HandBrake 0.9.9.5530 - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Ram: 4085 MB, Screen: 1680x1050
Temp Dir: C:\Users\leo-p_000\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\leo-p_000\AppData\Roaming\HandBrake\HandBrake\0.9.9.5530
Long time user, but now I am having a strange problem.
I just upgraded to 0.9.9.5530.
Now when my disc's show up in the source menu, but when I select them - nothing happens.
Files pop up right away.
But, even though the disc is shown in the source menu - nothing happens when I select it.
Is there any way to force the scan?
I have attached the activity log below, but since nothing is happening when I select the disc- it does not show any activity.
Is anyone else having a problem like this?
Please advise!
Thanks Pearcle-
HandBrake 0.9.9.5530 - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Ram: 4085 MB, Screen: 1680x1050
Temp Dir: C:\Users\leo-p_000\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\leo-p_000\AppData\Roaming\HandBrake\HandBrake\0.9.9.5530
Re: 0.9.9.5530 source not working?
Try Source -> Open Folder and point it to the disc drive.
-
- Experienced
- Posts: 88
- Joined: Sat Apr 11, 2009 2:28 pm
Re: 0.9.9.5530 source not working?
Is this a nightly build?pearcele wrote: I just upgraded to 0.9.9.5530.
If yes, try 5543.
Re: 0.9.9.5530 source not working?
Nah, It's 0.9.9-1 (patched release). I just tried it and it seemed to work for me. Is the Drive spinning up?
Re: 0.9.9.5530 source not working?
Many thanks for the swift replies!
I have tried on several different discs, and of course on one that worked fine with the 0.9.8 build.
It is the strangest thing - the drive and disc name populate in the Source tab just fine, and the action indicator in the lower left part of Hanbrake says "ready".
But when I select the drive: nothing happens....at all.
No drive activity, no change in status, etc.
When I select a File as the Source - it immediately notes "scanning source"....but with the selection of the drive as the source - no action, nada.
I'm hoping that someone else has bumped into this, as it is the first time it has happened to me after using Handbrake for the last 3 years.
Thanks in advance!
I have tried on several different discs, and of course on one that worked fine with the 0.9.8 build.
It is the strangest thing - the drive and disc name populate in the Source tab just fine, and the action indicator in the lower left part of Hanbrake says "ready".
But when I select the drive: nothing happens....at all.
No drive activity, no change in status, etc.
When I select a File as the Source - it immediately notes "scanning source"....but with the selection of the drive as the source - no action, nada.
I'm hoping that someone else has bumped into this, as it is the first time it has happened to me after using Handbrake for the last 3 years.
Thanks in advance!
Re: 0.9.9.5530 source not working?
Update -
Via the Source tab - I was able to use the "Folder" option and navigate to the DVD drive and initiate a scan that way.
That path seemed to work just fine, and Handbrake looks to have correctly scanned the DVD.
However, when I select the bottom most selection for the disc drive and title - there is still zero reaction from the program to initiate the scan (?).....and the drive just sits there.
Any insight as to what might be causing this behavior is much appreciated!
Via the Source tab - I was able to use the "Folder" option and navigate to the DVD drive and initiate a scan that way.
That path seemed to work just fine, and Handbrake looks to have correctly scanned the DVD.
However, when I select the bottom most selection for the disc drive and title - there is still zero reaction from the program to initiate the scan (?).....and the drive just sits there.
Any insight as to what might be causing this behavior is much appreciated!
Re: 0.9.9.5530 source not working?
No idea at this point. I've taken a gander at the code and nothing sticks out as being a possible bug.
Chances are it won't become obvious what the issue is until a couple of people report the same things.
Chances are it won't become obvious what the issue is until a couple of people report the same things.
-
- Posts: 1
- Joined: Thu Jun 06, 2013 1:44 am
Re: 0.9.9.5530 source not working?
I'm experiencing the exact same issue, running WHS 2011 (Server 2008 R2), I'm using the 64-bit version, 0.9.9.5530
-
- Posts: 2
- Joined: Fri Jun 28, 2013 9:57 am
Re: 0.9.9.5530 source not working?
I'm having the same issue in 0.9.9.5530 too, the open folder works fine so it's not a problem but just wanted to report it
Re: 0.9.9.5530 source not working?
Can you try a nightly please, let me know if it's any better.
-
- Posts: 2
- Joined: Fri Jun 28, 2013 9:57 am
Re: 0.9.9.5530 source not working?
His55 wrote:Can you try a nightly please, let me know if it's any better.
I just downloaded HandBrake-svn5614_x86_64-Win_GUI.exe and installed it and it's doing the same thing.
Re: 0.9.9.5530 source not working?
Hi, I have exactly the same problem with Handbrake 0.9.9 too (also with the current nightly build -5641).
No error message, nothing.
Before, I had no problems with Handbrake 0.9.8
Activity log contains no information.
Her my system information:
Windows 7 Ultimate SR1 64bit
RAM: 6GB
8 core CPU 2,67GHz
2 DVD drives: LG-HL-DT-ST BD-RE BH10LS30 and LG HL-DT-ST DVDRAM GH15F
I re-installed Handbrake 0.9.8 and it works well.
The only thing I had to renew (with both installations) was my self defined user profile.
No error message, nothing.
Before, I had no problems with Handbrake 0.9.8
Activity log contains no information.
Her my system information:
Windows 7 Ultimate SR1 64bit
RAM: 6GB
8 core CPU 2,67GHz
2 DVD drives: LG-HL-DT-ST BD-RE BH10LS30 and LG HL-DT-ST DVDRAM GH15F
I re-installed Handbrake 0.9.8 and it works well.
The only thing I had to renew (with both installations) was my self defined user profile.
Re: 0.9.9.5530 source not working?
I'm having the same issue, 0.9.8 works fine but the latest does not. Using open folder does appear to be a viable work around until it's fixed.
HandBrake 0.9.9.5530 - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz
Ram: 12286 MB, Screen: 1920x1080
Temp Dir: C:\Users\Adam\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\Adam\AppData\Roaming\HandBrake\HandBrake\0.9.9.5530
-------------------------------------------
No log data available... Log data will show here after you scan a source.
Open the log file directory to get previous log files.
HandBrake 0.9.9.5530 - 64bit Version
OS: Microsoft Windows NT 6.2.9200.0
CPU: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz
Ram: 12286 MB, Screen: 1920x1080
Temp Dir: C:\Users\Adam\AppData\Local\Temp\
Install Dir: C:\Program Files\Handbrake
Data Dir: C:\Users\Adam\AppData\Roaming\HandBrake\HandBrake\0.9.9.5530
-------------------------------------------
No log data available... Log data will show here after you scan a source.
Open the log file directory to get previous log files.
Re: 0.9.9.5530 source not working?
I'm having the same problem. The Mac Version works fine.
Re: 0.9.9.5530 source not working?
Grab a nightly build or use the Open Folder option.