Encryptions never end

[PRL]

I am trying to convert my home DVD to MP4.
I generated those DVD using Adobe Premiere. The source was Hi8 and DV tapes

HandBrakes seems to be doing ok and runs until it reaches 100% on the second pass. However, it keeps running after that and never stops. It creates an MP4 file that I can't open.

There are plenty of error messages in the log. Here is the first part of the log. The last error repeat itself forever

Help would be greatly appreciate.

Thanks in advance.

### Windows GUI 0.9.3 2008112300
### Running: Microsoft Windows NT 5.1.2600 Service Pack 3
###
### CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz
### Ram: 1023 MB
### Screen: 1680x1050
### Temp Dir: C:\Documents and Settings\Administrator\Local Settings\Temp\
### Install Dir: C:\Program Files\HandBrake
### Data Dir: C:\Documents and Settings\Administrator\Application Data\HandBrake\HandBrake\0.9.3.0
#########################################

[07:48:37] hb_init: checking cpu count
[07:48:37] hb_init: starting libhb thread
HandBrake 0.9.3 (2008112300) - http://handbrake.fr/
2 CPUs detected
Opening D:\VIDEO_TS...
[07:48:37] hb_scan: path=D:\VIDEO_TS, title_index=1
[07:48:37] scan: trying to open with libdvdread
*** Zero check failed in ifo_read.c:432
for vmgi_mat->zero_3 = 0x00000000010000000000000000000000000000
[07:48:37] scan: DVD has 1 title(s)
[07:48:37] scan: scanning title 1
[07:48:37] scan: opening IFO for VTS 1
[07:48:37] pgc_id: 1, pgn: 1: pgc: 0x15832a8
[07:48:37] scan: vts=1, ttn=1, cells=0->1, blocks=0->1694723, 1694724 blocks
[07:48:37] scan: duration is 00:50:26 (3026086 ms)
[07:48:37] scan: checking audio 1
[07:48:37] scan: id=a0bd, lang=Unknown (LPCM), 3cc=und ext=0
[07:48:37] scan: title 1 has 2 chapters
[07:48:37] scan: chap 1 c=0->0, b=0->786 (787), 1109 ms
[07:48:37] scan: chap 2 c=1->1, b=787->1694723 (1693937), 3024976 ms
[07:48:37] scan: aspect = 0
[07:48:37] scan: decoding previews for title 1
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
[07:48:37] scan: audio 0xa0bd: LPCM, rate=48000Hz, bitrate=1536000 Unknown (LPCM) (2.0 ch)
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
Scanning title 1...
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
[07:48:38] scan: 10 previews, 720x480, 23.976 fps, autocrop = 0/0/0/0, aspect 16:9, PAR 32:27
[07:48:38] Title is likely interlaced or telecined (6 out of 10 previews). You should do something about that.
[07:48:38] scan: title (0) job->width:720, job->height:400
[07:48:38] libhb: scan thread found 1 valid title(s)
+ title 1:
+ vts 1, ttn 1, cells 0->1 (1694724 blocks)
+ duration: 00:50:26
+ size: 720x480, aspect: 1.78, 23.976 fps
+ autocrop: 0/0/0/0
+ chapters:
+ 1: cells 0->0, 787 blocks, duration 00:00:01
+ 2: cells 1->1, 1693937 blocks, duration 00:50:25
+ audio tracks:
+ 1, Unknown (LPCM) (2.0 ch)
+ subtitle tracks:
+ combing detected, may be interlaced or telecined
Invalid sample rate 0, using input rate 48000
Modified x264 options for pass 1 to append turbo options: ref=3:mixed-refs=1:bframes=6:weightb=1:direct=auto:b-pyramid=1:me=umh:subq=9:analyse=all:8x8dct=1:trellis=1:no-fast-pskip=1:psy-rd=1,1:ref=1:subme=1:me=dia:analyse=none:trellis=0:no-fast-pskip=0:8x8dct=0:weightb=0
[07:48:38] 2 job(s) to process
[07:48:38] starting job
[07:48:38] Passthru requested and input codec is not the same as output codec for track 1
[07:48:38] job configuration:
[07:48:38] * source
[07:48:38] + D:\VIDEO_TS
[07:48:38] + title 1, chapter(s) 2 to 2
[07:48:38] * destination
[07:48:38] + C:\Documents and Settings\Administrator\Desktop\1v1.mp4
[07:48:38] + container: MPEG-4 (.mp4 and .m4v)
[07:48:38] * video track
[07:48:38] + decoder: mpeg2
[07:48:38] + bitrate 7464 kbps
[07:48:38] + frame rate: same as source (around 23.976 fps)
[07:48:38] + strict anamorphic
[07:48:38] + storage dimensions: 720 * 480 -> 720 * 480, crop 0/0/0/0
[07:48:38] + pixel aspect ratio: 32 / 27
[07:48:38] + display dimensions: 853 * 480
[07:48:38] + encoder: x264
[07:48:38] + options: ref=3:mixed-refs=1:bframes=6:weightb=1:direct=auto:b-pyramid=1:me=umh:subq=9:analyse=all:8x8dct=1:trellis=1:no-fast-pskip=1:psy-rd=1,1:ref=1:subme=1:me=dia:analyse=none:trellis=0:no-fast-pskip=0:8x8dct=0:weightb=0
[07:48:38] + bitrate: 4000 kbps, pass: 1
[07:48:38] encx264: keyint-min: 24, keyint-max: 240
[07:48:38] encx264: encoding with stored aspect 32/27
x264 [info]: using SAR=32/27
x264 [info]: using cpu capabilities: MMX2 SSE2 Cache64
x264 [info]: profile Main, level 3.0
[07:48:38] sync: expecting 72550 video frames
*** Zero check failed in ifo_read.c:432
for vmgi_mat->zero_3 = 0x00000000010000000000000000000000000000
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
[07:48:38] reader: first SCR 127027
[07:48:38] mpeg2: "" (2) at frame 0 time 9009
[07:48:38] sync: first pts is 9009
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
*** libdvdread: CHECK_VALUE failed in nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***

[rhester]

Try the latest development snapshot.

Rodney