HandBrake

@HandyMan any chance you could upload a sample that trips up the deinterlacing please? I'm gather samples for various problems to send off to them and I don't have one to hand that produces that. I'm assuming it was the J.E_20130201_19002000.ts one? here is 99mb of it : http://gfile.ru/d/tf/1b805af...

Being on the subject ... what about AC3 3.0ch? I haven't found a way to go from 3.0ch 384 to 3.0ch 256 Kbps with Handbrake. HandBrake svn5239 2013020501 OS: Microsoft Windows NT 6.1.7601 Service Pack 1 CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Ram: 8089 MB, Screen: 1920x1080 Temp Dir: C:\Users\S...

24.766872 fps vs 26.192163 fps OpenCL
I7-2600K HD3000 but Lucid Logic software is NOT installed as only 2 applications were supported.

I ran into problem when rebooting after system update before. Until I figure out that I had to wait for restore point to finish ! Last night it just froze, Had to reset, power down, power up, it came back ok. Nothing much to see except the power faillure in event log. Yes OpenCL seems ok but no FPS ...

I've added a warning to the first post in this thread and on the nightly build page. It seems hardware decode has the potential to cause BSOD / spontaneous reboots and/or crashes inside the graphics driver which it may or may not be able to recover from. Given my Raid array is currently rebuilding ...

I think subtitles will be back in 5240. You won't be able to use hardware decode though if you select them, as the hardware path doesn't support closed captions. Yup they are up ... but HWD vanishes :!: I disabled the subtitle in Options, I load a file, no subtitles get selected and HWD disappears....

I think subtitles will be back in 5240. You won't be able to use hardware decode though if you select them, as the hardware path doesn't support closed captions. Those files were installed by Intel. There are probably also AMD versions of the same libraries installed on your system too. I dunno wha...

Did some test with OpenCL 5239svn same results bad deinterlace, so the option in the Catalyst control panel doesn't change anything No subtitles either. Same file with Nightly 5239svn subtitles ok but it is slower by 10% than OpenCL all unticked! even without subtitles decoding ? I found these 3 tim...

You can try installing two different builds in two locations. The issues with double installation is that both packages Nightly and OpenCL have the same name so there is only one installation present in Control Panel/Programs section,so I have to remove the 'other one' by hand before installing a n...

s55 wrote:so you may have problems selecting it if it's not appearing in the GUI :/

Yup there is no subtitle to select in the GUI

On thing puzzle me ... if I see interlaced on the encode, why decomb didn't see it ?

Firstly, Nightlies are fixed, so grab a new build to make sure you have the latest. Interesting. I'm willing to bet that Hardware Decode is using the system settings in AMD's control panel. In there, you'll probably find deinterlacing turned on. This would explain why decomb is doing very little wh...

[quote="Mountainbush"][/quote]

Can you trigger this with a another version of HandBrake?
Nightly? Win32?

s55 wrote: Drivers unlike applications, run in the kernel space so can cause these kinds of problems.

However, Display driver bug can be triggered by applications and HandBrake sometimes does weird things to the display went active.

Mountainbush wrote:Well this is sad... I just ran Prime95, FurMark, and BurnInTest all at once.

I'm not sure running all benchmarks at once will be the worse case!
Just running Prime95 alone should strain the system.

Did a long run on the same file same preset different results. One is that the OpenCL seems to deinterlace the clip ... instead of decomb ?! Which messed the encode, there is clearly interlace visible :x Then different compression: OpenCL svn5232 [21:28:33] decomb: deinterlaced 7 | blended 135 | unf...

However subtitles are not longer decoded.... even without OpenCL and HWD SVN5229 HandBrake svn5219 2013012901 OS: Microsoft Windows NT 6.1.7601 Service Pack 1 CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Ram: 8089 MB, Screen: 1920x1080 GPU: Intel(R) HD Graphics 3000 GPU driver version: 9.17.10.2932...

Oups bump to 5232svn and the result a much better :D Same 5min 1080i ts Preset Slow 24.766872 fps 26.192163 fps OpenCL 37.833889 fps HWD 42.515965 fps HWD OpenCL Nothing HandBrake svn5229 2013020101 OS: Microsoft Windows NT 6.1.7601 Service Pack 1 CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Ram: 8...

[18:37:02] Notice: No available GPU device. I'm guessing that's switchable graphics right? HD3000 and 6850m Are you able to force the system to use the 6850 only to re-test? I remove LucidLogix software, went into the BIOS/System Agent Configuration/iGPU Memory to change the memory from 64M to 512M...

Driver issue with AMD or Intel? I assume with Intel, so they simply should leave them out of OpenCL acceleration business as long as Intel cannot make a good driver. I guess they had to fix somethings in the silicon to make it work, they did release chips with HD4000 soon after the HD3000. I wonder...

Depends on what you used discard the audio tracks.
I am getting similar audio gap when I cut some ts file with Avidemux.

Win7x64 SVN5199
So I save a preset with 'Extra option'
load the preset
empty the Extra option
update the preset
switch preset
reload preset and the Extra Option is still present!

Not a big issue, restart from High Profile will empty and create a new profile to clear the Extra Options in x264

got this on Win7x64 nightly a few weeks ago

[18:37:02] Notice: No available GPU device. I'm guessing that's switchable graphics right? HD3000 and 6850m Are you able to force the system to use the 6850 only to re-test? You may also want to make sure your running latest drivers. I'm willing to bet the the HD3000 is not compatible and it's not ...

[18:37:02] Notice: No available GPU device. I'm willing to bet the the HD3000 is not compatible and it's not able to get ahold of the 6850 but it still knows it's there, which is causing it to not correctly fall back to software. I'll mention it to them to see if they have any hardware like this to...